703996
83
Zoom out
Zoom in
Previous page
1/88
Next page
81
Troubleshooting
Condition Cause Reference
The needle thread
breaks
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread is not set under the presser foot when start sewing.
6. The thread is tangled around the spool.
Page 19
Page 12
Page 14
Page 14
Page 26
Use the spool holder.
The bobbin thread
breaks
1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
Page 18
Page 78
Change the bobbin.
The needle breaks 1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The needle is too ne for the fabric being used.
4. An inappropriate presser foot is used.
Page 14
Page 14
Page 14
Use the correct foot.
Skipped stitches 1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or threads are not suitable for the work being sewn.
3. A blue tip needle is not being used for sewing stretch, very ne fabrics
and synthetics.
4. The needle thread is not threaded properly.
5. A poor quality needle is used.
Page 14
Page 14
Use the stretch stitch
needle.
Page 19
Change the needle.
Seam puckering 1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. The foot pressure is not adjusted properly.
6. A stabilizer is not used when sewing very ne fabrics.
Page 12
Page 19
Page 14
Make stitch shorter.
Pa ge 11
Apply a stabilizer.
The fabric is not
feeding smoothly
1. The feed dog is packed with lint.
2. The stitches are too ne.
3. The feed dog is not raised after ”drop feed” sewing.
Page 78
Make stitch longer.
Pa ge 11
Loops on the seams 1. The needle thread tension is too loose.
2. The needle is too thick or too ne for the fabric.
Page 12
Page 14
The machine does
not work
1. The machine is not plugged in or foot control is not connected.
2. Thread has been caught in the hook race.
3. The presser foot is not lowered.
Page 7
Page 78
Pa ge 11
Buttonhole sewing
is not sewn properly
1. The stitch density is not suitable for the fabric being sewn.
2. The interfacing has not been used for the stretch or synthetic fabric.
3. The buttonhole lever is not lowered.
Page 47
Apply an interfacing.
Page 45
The machine is
noisy
1. Thread has been caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
Page 78
Page 78
Layers shift 1. The foot pressure is not suitable for fabrics being sewn. Pa ge 11
Auto thread cutting
failed
1. Thread is too thick for the auto thread cutting.
2. Threads have been caught in the thread cutter mechanism.
Page 9
Page 78
The stitch pattern
cannot be selected.
1. The stitch pattern is 58 or 60 in mode 2 (Bridge stitches). Page 70
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 580 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 580 plus in the language / languages: English as an attachment in your email.

The manual is 18,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXcellence 580 plus

Elna eXcellence 580 plus User Manual - German - 88 pages

Elna eXcellence 580 plus User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info