704003
16
Zoom out
Zoom in
Previous page
1/60
Next page
10
w
e
q
w
e
q
w
q
Removing the Presser Foot
z
Turn off the power switch and unplug the machine.
x
Turn the handwheel toward you to raise the needle.
Raise the presser foot.
c
Press the lever located on the back of the foot holder.
The presser foot will drop off.
q
Handwheel
w
Lever
e
Foot holder
Attaching the Presser Foot
z
Turn off the power switch and unplug the machine.
x
Place the presser foot so that the pin on the foot lies
just under the groove of the foot holder.
c
Lower the foot holder to lock the foot into place.
v
Raise the presser foot lifter to check that the presser
foot is secure.
q
Foot holder
w
Groove
e
Pin
Raising or Lowering the Presser Foot
By raising or lowering the presser foot lifter, the presser
foot goes up or down.
* While in operation, keep the presser foot lowered
except when threading the machine or test running
without threads.
NOTE:
Thread tension will be released when the presser foot
lifter is raised.
q
Presser foot
w
Presser foot lifter
w
q
Adjusting the Foot Pressure
It is not necessary to adjust the pressure of the presser
foot for regular sewing.
When sewing heavyweight fabrics, increase the foot
pressure by turning the adjusting screw in the direction
of “+”.
When sewig lightweight fabrics, decrease the foot
pressure by turning the adjusting screw in the direction
of “–”.
For regular sewing, align the line on the screw with the
top surface of the machine.
q
Line
w
Top surface
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna Easycover at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna Easycover in the language / languages: English, German, French as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info