703983
4
Zoom out
Zoom in
Previous page
1/9
Next page
Preparing Machine for Top Cover
IMPORTANT:
We recommend you become
familiar and successfully sew all
stitches (especially the Cover
Hems) described in the 745 manual
before attempting to sew any
version of the Top Cover.
1. Select 10.
2. Turn off machine.
3. Hand turn flywheel towards you
to check that the upper looper
remains down in the disengaged
position.
4. Set machine up according to
display.
NOTE: DO NOT set the SL dial below
2.5. Heavier fabrics will require a
longer stitch length.
5. Depending on Top Cover
desired, insert needles.
6. Attach top cover foot "R" (blue
transparent). Lower presser foot.
7. Insert spreader device (1) into
slot (A) and tighten screw (B)
with allen screwdriver.
8. Slightly loosen R1 and R2
needle screws. Insert round top
cover guide (2) into opening of
R2 needle hole. Firmly tighten
only the R2 needle screw.
9. Open the front cover. Swing
down the top cover lever (C) with
the triangle top cover guide and
coin screw (3).
NOTE: DO NOT swing down the top
cover lever with the A/B foot attached,
the "R" presser foot up or front cover
closed. Surface of cover table will be
scratched if you move top cover lever
with front cover closed. Or the triangle
top cover guide (3) will be damages.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna 845 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna 845 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna 845

Elna 845 User Manual - English, German, French, Italian - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info