Manual Elna 745 (page 26 of 117) (English, German, French, Italian)

614454

Zoom out

Zoom in

1/117

Needle Position

There are 5 needle positions available to

sew the 17 stitches. A colored dot

corresponding to the color of the stitch

name appears above L0, L1, L2, R1 or R2

to indicate which position(s) will require a

needle. Insert a needle into the proper

needle position. (See page 36 for

operating tilting needle clamp.)

Example:

• Yellow dots = 5 Thread

Insert a needle in position R1 and R2.

• Blue dot = 3 Thread Wide

Insert a needle in position R1.

• Red dot = Overlock 3

Insert a needle in position R1.

IMPORTANT: Switch off the machine

when inserting needles.

G. Set Cutting Width Dial

The cutting width dial sets the distance

between the needle and where the blades

cut. Turn the dial until the readout on the

display panel is visible in the side door

window.

Example:

• Blue N = 5 Thread and 3 Thread

Wide – move cutting width dial to N

setting.

• Red 1 = Overlock 3 – move cutting

width dial to 1 setting.

HINT: Open left side cover to fully expose

cutting width dial to more easily turn dial

for wider widths.

IMPORTANT: Never move cutting width

dial if threads are forming a stitch around

the instant rolled hem device (stitch width

finger). Remove threads by raising

presser foot and gently pulling them to the

back.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna 745 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 11,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna 745 Manual

Product: