614452
17
Zoom out
Zoom in
Previous page
1/50
Next page
15
Needle Position
The needles to be used for a specific stitch are
indicated by icons above the needle position marks.
Remove a needle if not to be used.
Tilting up the needle clamp
The needle clamp can be tilted up for easy needle
replacement and threading.
IMPORTANT:
When removing and inserting the needles, be sure
to:
turn the power switch q off.
turn the handwheel toward you and match the
alignment marks w.
lower the presser foot.
Grasp the tab and pull the needle clamp up while
pushing the button.
e Tab
r Button
CAUTION:
Do not turn the handwheel while the needle clamp
is tilted up.
Removing the needle
Loosen the setscrew with the screwdriver.
Pull the needle down to remove.
Lightly tighten the setscrew to prevent it from
loosening during sewing.
Inserting the needle
Loosen the setscrew of the desired needle position.
Insert the needle with the flat side to the back.
Push the needle up as far as it will go and tighten
the setscrew securely.
Tilting down the needle clamp
Grasp the tab and push the needle clamp down
while pushing the button.
Release the button when the needle clamp is locked
in position.
Turn the handwheel slowly and check that the
needle(s) does not hit or thrust the presser foot or
needle plate.
q
w
e
r
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna 664 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna 664 PRO in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna 664 PRO

Elna 664 PRO User Manual - English, German, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info