Manual Elna 344 (page 47 of 77) (English, German, French, Italian)

631179

Zoom out

Zoom in

1/77

Starting to Sew

Always test sew on scraps of the same

fabric that you will be using. Place the fabric

scrap under the presser foot and needles.

Lower presser foot lever.

Hand turn the flywheel to form the first few

stitches. Begin using the foot control at a

slower speed, gradually building up the

speed.

Hand guide the fabric gently while sewing.

Check the stitch formation. If the stitch has

irregularities, check the threading.

When you reach the end of the fabric, continue

sewing to form stitches off the fabric (overlock

chain-off threads). Keep pressing the foot

control until you are able to cut the overlock

chain-off threads.

Continue sewing by simply placing the next

fabric piece in front of the feed dogs. Tip up

the front end of the foot and insert the fabric

under the foot.

NOTE:

It is not necessary to lift up the presser foot

when placing the next fabric piece.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna 344 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna 344 Manual

Product: