Manual Elna 344 (page 17 of 77) (English, German, French, Italian)

631179

Zoom out

Zoom in

1/77

Needles

Changing the Needle(s)

Your machine comes with HAx1

(130/705H) needles.

Common stitch problems can often be

traced directly to the needle.

Needle inserted incorrectly.

(Flat side should be to the back.)

Needle not pushed up high enough

into position.

Needle is dull or has burrs.

(Change needles frequently; even

new needles can have imperfections.)

1. Switch OFF the machine. Turn the

flywheel toward you to raise the

needle(s) to their highest position.

Lower the presser foot.

2. Each needle position has a set screw.

Hold the needle and using the hexagon

wrench, turn the needle clamp screw

counterclockwise to loosen. Remove

needle.

3. Insert needle with flat side to the back,

pushing it up as far as it will go.

4. Tighten set screw.

NOTE:

Needles will always sit unevenly with the

left needle always higher than the right.

If needles are even, loosen set screws

and reinsert needles.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna 344 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna 344 Manual

Product: