668335

Elma 807s Manual

39
Zoom out
Zoom in
Previous page
1/44
Next page
Elma 805/807
Page 39
MANUAL OR AUTO-RANGING
Press the RANGE button momentarily to select manual-ranging mode, and the
meter will remain in the range it was in, the LCD annunciator turns off. Press
the button momentarily again to step through the ranges. Press and hold the
button for 1 second or more to resume auto-ranging mode.
Note: Manual ranging mode feature is not available in Hz & Cx functions.
HOLD
The hold feature freezes the display for later view. Press the HOLD button
momentarily to activate or to exit the hold feature.
MAX
The max feature compares and displays the measured maximum value as fast as
25ms in a single range, and with automatic up range capability. Press the MAX
button for 1 second or more to activate or to exit the max feature in the voltage or
current functions.
SLEEP MODE
The meter will enter a low power consumption sleep mode automatically to extend
battery life after approximately 30 minutes of no rotary-switch or push button
operations. To wake up the meter from sleep mode, press any buttons
momentarily or turn the rotary-switch to an adjacent position. Always set the
rotary-switch to the OFF position manually when the meter is not in use.
5) MAINTENANCE
WARNING
To avoid electrical shock, disconnect the meter from any circuit, remove the test
leads from the input jacks and turn OFF the meter before opening the case. Do
not operate with open case.
CLEANING AND STORAGE
Periodically wipe the case with a damp cloth and mild detergent; do not use
abrasives or solvents. If the meter is not to be used for periods of longer than 60
days, remove the batteries and store them separately
TROUBLE SHOOTING
If the instrument fails to operate, check batteries and test leads etc., and replace
as necessary. Double check operating procedure as described in this user’s
manual.
If the instrument voltage-resistance input terminal has subjected to high voltage
transient (caused by lightning or switching surge to the system) by accident or
abnormal conditions of operation, the series fusible resistors will be blown off
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elma 807s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elma 807s in the language / languages: English, German, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info