668441

Elma 6700 Manual

51
Zoom out
Zoom in
Previous page
1/56
Next page
Elma 6700 side 51
Meter Info
The Meter Info selection lists the serial number, model number, firmware version,
calibration date, and calibration counter. Operator name, company name are displayed.
Setting the Event Threshold Value
Press the softkey labeled Setup to access the setup menu.
Using the cursor buttons, move the menu selector next to the menu item labeled
Instrument and press the softkey labeled Enter to open the recording setup screen. Using
the cursor buttons,move the menu selector next to the menu item labeled Event Threshold
for Recording(AutoHOLD) and then press the softkey labeled Edit. Press or to scroll
through the event threshold values. With the desired value selected, press the softkey
labeled Close.
Calibration
The Calibration selection allows a qualified calibration technician to enter a password that
allows the Meter to be calibrated.
Using Communications
You can use the Wireless communication link and transfer the contents of a meter’s
memory to a PC.
Setting Date and Time
The Meter’s internal clock is used in the display and for timestamping recorded
measurements. To change the date and time as well as the display format, press the
softkey labeled Setup. Position the menu selector next to the menu item labeled Display.
To set the date and time, press the softkey labeled.
Date/Time to open the date/time menu. Next, position the menu selector next to either the
Set Date item or Set Time item and press the softkey labeled Edit. Using and ,
position the cursor on the date or time element to adjust.
Use and to change the selected date or time element value. Press OK to complete
the action.
Auto Power Off
Press the softkey labeled Setup. Position the menu selector next to the menu item labeled
Display. To set Auto Power Off and then press the softkey labeled Edit. Use and to
adjust the time to one of the preset values. 0 is disable the timeout feature. Press the
softkey labeled OK to set the selected time.
Press the softkey labeled Close to return.
Setting Format
Press the softkey labeled Setup. Position the menu selector next to the menu item labeled
Format. Using thecursor buttons, move the menu selector next to the menuitem labeled
Numeric(Date\Time) format, press the softkey labeled EDIT, select 0.0000(0,0000) and
MM/DD/YY(DD/MM/YY) and 24 HOUR (12 HOUR) format.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elma 6700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6700 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 13,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info