Manual Ellermeyer nania - Racer SP (page 15 of 40) (English, German, Dutch, French, Italian, Portuguese, Spanish)

499524

Zoom out

Zoom in

1/40

User guide - GB

Your Group 1-2-3 booster seat (2)

1. Adjustable headrest

2. Harness straps (x2)

3. User guide pocket (if ﬁtted on this model)

4. Shell

5. Crotch strap

6. Harness buckle

7. Adjustment strap (x2)

8. Body insert (if ﬁtted on this model)

9. Adjustor (x2)

10. Safety cover (x2)

11. Diagonal belt guide (x2 – used without the harness)

Installation with the harness

Gr. 1, from 9 to 18 kg (from approximately 9 months to 4 years)

Make sure that the harness of your car seat is adapted to the height of your child

before starting to install the seat in your car.

The harness can be adjusted to three different heights. The straps must pass

through the holes that are closest to your child’s shoulders. If your child’s shoul-

ders are between two levels, always use the higher of the two. To adjust the height

of the harness, remove the upper section of one of the harness straps by twisting

the metal keeper located behind the backrest (3) and then pulling the end of the

harness strap through the slots of the shell and the cover (4). Feed the end of the

harness strap through the same slots at the desired height, both in the cover and

the shell (5) and reattach it behind the backrest (6). Make sure that the metal

anchor is correctly positioned and that the end of the harness strap is not twisted.

Repeat the operation on the second strap.

• To tighten the harness: Pull on the adjusting straps positioned on the harness.

You do not need to press on the adjuster buttons (7).

• To loosen the harness: Press on the adjuster buttons positioned on the upper sec-

tion of the harness, grasp the lower section and pull simultaneously (8). Press on

the red harness button on the buckle to free your child completely.

Place the car seat against the back seat of the vehicle (9). Lower the headrest as

far as possible. Pull on the vehicle seat belt until it is completely loose. Feed both

straps of the belt through the openings in the cover and the backrest shell (10)

making sure the waist strap passes under the arm rest of the car seat and that the

diagonal strap rises vertically between the backrest and the head support without

passing through the belt guide. Bring the vehicle belt out through the opposite

openings (11). Make sure that the waist strap of the belt passes under the arm rest

and that the diagonal strap passes above the arm rest of the car seat. Fasten the

vehicle seat belt, making sure that it is not twisted (12). Push the car seat ﬁrmly

against the back seat of the vehicle and tighten the belt as much as possible by

pulling the waist strap and the diagonal strap towards the winder (13). Open the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ellermeyer nania - Racer SP in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ellermeyer nania - Racer SP Manual

Product: