741485

Elkron MP110TG Manual

17
Zoom out
Zoom in
Previous page
1/20
Next page
(((ELKRON)))
MP110 USER MANUAL
(((ELKRON)))
MP110 USER MANUAL
14. List of Messages on Display
MESSAGE: NOTES:
‘No PWR C.U. ZONES’ Short circuit or no power to inputs.
‘No PWR OUTPUTS‘ Short circuit or no power to sirens.
‘No PWR SERIAL ‘ Short circuit or no serial power to peripherals.
‘LOW BATTERY’ Low,exhausted, no battery.
‘NO MAIN CONTROL PANEL’ No mains in control unit.
‘C.U. PWR SUPPLY’ Low power to control unit sensors.
(ccc)=Codice di accesso usato per operare (ove compare).
‘No PWR C.U. ZONES’ Input power failure.
‘No PWR OUTPUTS ‘ Siren power failure.
‘No PWR SERIAL ‘ Serial peripheral power failure.
“OK BATTERY ‘ Recharged battery.
‘OK MAIN’ Mains return to control unit.
‘—On/Off— unn’ Status shift (On/Off).
‘ON FROM REMOTE ‘ Remote arming (via FASTLINK).
‘START TEST unn’ Plant test start.
‘END TEST unn’ Plant test end.
‘START TELEG. unn” Telemanagement start (FASTLINK).
‘END TELEG. unn’ Telemanagement end (FASTLINK).
‘ALARM ZONE xx’ Alarm message –zone xx.
‘TAMPER ZONE xx’ Tamper message – zone xx ( For double bil inputs).
‘Z24 CONTROL PAN’ Control unit self-protection.
‘FALSE USER CODE’ Alarm due to false code entered from keypad.
‘FALSE KEY CODE’ Alarm due to false key code.
‘TAMPER KEYPAD x’ Keypad x self-protection.
‘ BUS READER x’ Tamper of commutator x serial line.
‘ BUS KEYPAD x’ Tamper of keypad x serial line.
‘ccc INSULAT. Z.nn’ Zone xx bypassing message carried out by user ccc
‘ccc SETTED Z.xx’ Zone xx reentry message carried out by user ccc
17
4.Sensor EXCLUDED/Re-entry
1. Enter the Master USER code and press the
E
key.
2. The first sensor available for EXCLUDED is shown. The display
indicates “nn” (where nn is the number of sensor, refer to the sensor
table to know to which zone it corresponds).
3. Use the
1
key for forwardEXCLUDED sensor selection
Use the
2
key for backward EXCLUDED sensor selection
Use the
TOTAL
key to return to the beginning of list
4. To EXCLUDED the sensor under consideration, press
E
.
The sensor number will flash on the keypad screen.
If all sensors are EXCLUDED, “--” (two hyphens) will appear on the
display.
5. Press
EXIT
F
to exit programming.
1. Enter the Master USER code and press the
O
key.
2. Re-entry of the first EXCLUDED sensor will be proposed. The display
indicates “nn” (where nn is the number of the EXCLUDED sensor,
refer to the sensor table to know the zone to which it corresponds).
3. Use the
1
key for forward EXCLUDED sensor selection
Use the
2
key for backward EXCLUDED sensor selection
Use the
TOTAL
key to return to the begiinning of list
4. To re-enter the zone under consideration, press
O
5. The number of the sensor flashes on the keypad screen To select the
next zone, press the
1
or
2
key. If there are no EXCLUDED
zones, the symbol “- -” (two hyphens) appears on the display.
6. Press
EXIT
F
to exit programming
4.1 Sensor EXCLUDED
4.2
Re-entry of Previously EXCLUDED Sensors
24
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron MP110TG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110TG in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110TG

Elkron MP110TG User Manual - German - 32 pages

Elkron MP110TG User Manual - French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info