741485

Elkron MP110TG Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
(((ELKRON)))
MP110 USER MANUAL
(((ELKRON)))
MP110 USER MANUAL
• Press key
C
**
followed by key
8
.
• The display shows date and time : “dd-mm-yy hh-mm” replacing the
factory set message “((EKLRON) MP 110)”.
• To re-establish the factory set message replacing the date/time, press
C
**
+
O
in sequence.
• The flashing of the led indicates one or more EXCLUDED
zones.
• To display the EXCLUDED sensors, type in the USER 1 code and press
the
O
key.
• The first EXCLUDED zone is indicated by the message “SETTING
ZONE nn” (where nn is the number of the sensor, refer to the sensor
table to know to which zone it corresponds).
• Use the
1
key to forward scroll the EXCLUDED sensors.
Use the
2
key to backward scroll the EXCLUDED sensors.
Use the
TOTAL
key to return to the beginning of the list.
• Press
EXIT
F
to exit the programming function.
See par. 6.
to set
the date/time
5.4 Date/Time Visualization
5.5 Display of EXCLUDED Sensors
11
10.
Call Results Visualization
1. Further to an alarm, this procedure allows to verify which telephone
numbers have been called and which have properly answered.
2. Enter MASTER code +
F
+
9
+
A
.
3. The called numbers are visualized in sequence approx. every 1 second
with the following mode: on the left digit the telephone number is visualized,
on the right digit the same number is visualized in case of positive ended
message or with a horizontal dash in case of no answer.
4. In case of information lack the display will visualize the symbol “- -“ (two
dashes)
5. If you want to cancel the information, press key
E
.
6. To exit from procedure press key
F
twice.
11. Listening to Voice Messages
Listening takes place by means of the loudspeaker connected to the
voice board in the control unit
1. Enter the MASTER USER code.
2. Press the keys
F
+
TEL
9
+
5
.
3. Press key
5
to start the reproduction of all recorded messages, at
the end of the messages, you go back to the communicator menu.
4. If you want to listen to a message in particular, use keys
12
to
select the desired message and to start listening by means of key
5
.
5. At the end of the reproduction, a following message can be selected.
Press
EXIT
F
to exit from listening procedure.
Example of call on telephone no. 5 that
has properly answered
Example of call on telephone no. 5 with
no answer
30
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron MP110TG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110TG in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110TG

Elkron MP110TG User Manual - German - 32 pages

Elkron MP110TG User Manual - French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info