Manual Elkron MP110M (page 17 of 20) (English)

741486

Zoom out

Zoom in

1/20

(((ELKRON)))

MP110 USER MANUAL

(((ELKRON)))

MP110 USER MANUAL

14. List of Messages on Display

MESSAGE: NOTES:

‘No PWR C.U. ZONES’ Short circuit or no power to inputs.

‘No PWR OUTPUTS‘ Short circuit or no power to sirens.

‘No PWR SERIAL ‘ Short circuit or no serial power to peripherals.

‘LOW BATTERY’ Low,exhausted, no battery.

‘NO MAIN CONTROL PANEL’ No mains in control unit.

‘C.U. PWR SUPPLY’ Low power to control unit sensors.

(ccc)=Codice di accesso usato per operare (ove compare).

‘No PWR C.U. ZONES’ Input power failure.

‘No PWR OUTPUTS ‘ Siren power failure.

‘No PWR SERIAL ‘ Serial peripheral power failure.

“OK BATTERY ‘ Recharged battery.

‘OK MAIN’ Mains return to control unit.

‘—On/Off— unn’ Status shift (On/Off).

‘ON FROM REMOTE ‘ Remote arming (via FASTLINK).

‘START TEST unn’ Plant test start.

‘END TEST unn’ Plant test end.

‘START TELEG. unn” Telemanagement start (FASTLINK).

‘END TELEG. unn’ Telemanagement end (FASTLINK).

‘ALARM ZONE xx’ Alarm message –zone xx.

‘TAMPER ZONE xx’ Tamper message – zone xx ( For double bil inputs).

‘Z24 CONTROL PAN’ Control unit self-protection.

‘FALSE USER CODE’ Alarm due to false code entered from keypad.

‘FALSE KEY CODE’ Alarm due to false key code.

‘TAMPER KEYPAD x’ Keypad x self-protection.

‘ BUS READER x’ Tamper of commutator x serial line.

‘ BUS KEYPAD x’ Tamper of keypad x serial line.

‘ccc INSULAT. Z.nn’ Zone xx bypassing message carried out by user ccc

‘ccc SETTED Z.xx’ Zone xx reentry message carried out by user ccc

4.Sensor EXCLUDED/Re-entry

1. Enter the Master USER code and press the

key.

2. The first sensor available for EXCLUDED is shown. The display

indicates “nn” (where nn is the number of sensor, refer to the sensor

table to know to which zone it corresponds).

3. Use the

key for forwardEXCLUDED sensor selection

Use the

key for backward EXCLUDED sensor selection

Use the

TOTAL

key to return to the beginning of list

4. To EXCLUDED the sensor under consideration, press

The sensor number will flash on the keypad screen.

If all sensors are EXCLUDED, “--” (two hyphens) will appear on the

display.

5. Press

EXIT

to exit programming.

1. Enter the Master USER code and press the

key.

2. Re-entry of the first EXCLUDED sensor will be proposed. The display

indicates “nn” (where nn is the number of the EXCLUDED sensor,

refer to the sensor table to know the zone to which it corresponds).

3. Use the

key for forward EXCLUDED sensor selection

Use the

key for backward EXCLUDED sensor selection

Use the

TOTAL

key to return to the begiinning of list

4. To re-enter the zone under consideration, press

5. The number of the sensor flashes on the keypad screen To select the

next zone, press the

key. If there are no EXCLUDED

zones, the symbol “- -” (two hyphens) appears on the display.

6. Press

EXIT

to exit programming

4.1 Sensor EXCLUDED

4.2

Re-entry of Previously EXCLUDED Sensors

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elkron MP110M in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron MP110M

Elkron MP110M User Manual - German - 32 pages

Elkron MP110M User Manual - French - 120 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elkron MP110M Manual

Product: