741398
9
Zoom out
Zoom in
Previous page
1/18
Next page
DS80TC1S-001C 9
**
The supplied chart assumes the presence of a 170 cm tall intruder and an ambient temperature of 25° C.
The detector is less sensitive if the intruder moves directly toward it. The detector must not be installed in front
of a door.
Detector installation
Surface installation:
I. Remove the fixing screw and the cover.
II. Detach the provisions for holes for fastening on a surface placed on the base.
III. Using a template for the holes, drill the holes in the surface.
IV. Insert the anchor bolts if the device is fixed to plaster or bricks.
V. Screw the base into the anchor bolts.
VI. Screw the cover back onto the base.
Corner installation:
1. Detach the two provisions for holes on the triangular bracket.
2. Using the two holes as template, drill the holes corresponding to the corner surface.
3. Insert the anchor bolts.
4. Screw the triangular bracket onto the anchor bolts with the two position indicators on the top towards the user.
5. Install the detector on the hooks of the triangular bracket.
6. If necessary, detach the four provisions for holes for fixing in the corner.
7. Use the hole provisions for fixing in the corner as a mask to make the corresponding holes on the surface in the
corner.
8. Insert the anchor bolts if the device is fixed to plaster or bricks.
9. Screw the base into the anchor bolts.
10. Screw the cover onto the base and check that the tamper switch is completely compressed against the
triangular bracket.
Technical specifications
Power supply: 3 lithium batteries AA 1.5V
Battery life: 2.5 years (typical value, can vary according to use)
Infrared range: max. 11 m at 90°
Video camera: VGA CMOS with 60° horizontal angle
Camera lighting range: up to 5 m
Two-way radio frequency 2.4 GHz
Video encoding: 3GPP QCIF
Working temperature range -10°C – +45°C
Dimensions: 123 x 72 x 54.5 mm
Weight: 300g
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, URMET S.p.A. declares that the radio equipment type: INDOOR INFRARED DETECTOR WITH CAMERA IR600VC is
in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: www.elkron.com
ELKRON
Tel. +39 011.3986711 - Fax +39 011.3986703
www.elkron.com mail to: info@elkron.it
ELKRON
is a trademark of URMET S.p.A. Via Bologna 188/C –
10154 Torino (TO) Italy
HU
www.elkron.com
U
H
MADE IN TAIWAN
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron IR600VC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron IR600VC in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron IR600VC

Elkron IR600VC Quick start guide - English, German, French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info