741401
3
Zoom out
Zoom in
Previous page
1/8
Next page
ENGLISH
IR600FC/N
INDOOR INFRARED DETECTOR WITH CAMERA
1. Illuminator
2. Blue LED/Function button
3. IR sensor lens
4. Camera lens
5. Battery compartment lid
6. Tamper switch
7. Battery compartment
8. Jumper JP3 PIR sensitivity
9. Jumper JP2
10. Fastening screw
LED
The blue LED lights up in the following conditions:
- The blue LED blinks once every 20 minutes: the detector has lost the connection with
the control unit.
- The blue LED lights up for 30 seconds: the detector is being initialised in test mode.
- The blue LED blinks fast twice: the detector is connected correctly to the control unit.
- The blue LED lights up for two seconds during normal operation: the detector has
detected a motion.
- The blue LED blinks fast: the detector is transmitting images to the control unit.
- The blue LED and the illuminator blink once: the detector was reset.
Using the function button:
- Press the button once to send a supervision signal.
- To reset the detector: hold the button pressed for 10 seconds. Release the button
when the illuminator and the blue LED blink once.
- For the learning procedure of the detector on the control unit
Jumper JP3 PIR sensitivity
- Jumper on: "High" sensitivity level.
- Jumper off: "Normal" sensitivity level (default setting).
Jumper JP2
- Jumper On: after transmitting following a detected movement, the signals and the
acquired images will be transmitted if any other movements are detected (default setting).
- Jumper Off: the detector has a “sleep time” (see below) of approximately 1 minute to
save energy.
Test mode
The Test mode is used to control the detection coverage of the device not the communication range with the control unit.
To access Test mode: hold the function button pressed for five seconds. The blue LED will light up and stay on for
approximately 30 seconds after having released the button. Test mode, which lasts for 3 minutes, will start after this time.
The detector will start initialisation during the first 30 seconds. The detector does not manage intrusions or movements
during this time.
Motion detection in front of the detector can be checked at the end of the initialisation period. The blue LED lights up for
two seconds after detection.
<
<
N
N
O
O
T
T
E
E
>
>
Check that the "Rest Time" function is not enabled before entering Test mode.
QUICK GUIDE
DS80TC2S-002
10
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron IR600FC-N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron IR600FC-N in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elkron IR600FC-N

Elkron IR600FC-N User Manual - English, German, French, Italian - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info