741425
7
Zoom out
Zoom in
Previous page
1/52
Next page
7/52 HPA800
La fase di diagnostica non impone limiti di tempo: le segnalazioni sui LED e/o sulla tromba rimangono attive per
10 minuti a partire dall’ultima variazione poi vengono disattivate e rimangono in tale condizione fino a che un
qualsiasi ingresso cambia stato.
ATTENZIONE! Solo durante la fase di diagnostica è possibile modificare la configurazione tramite i dip-
switch.
3.2 TEMPO DI PRE-ATTIVAZIONE
Quando tutti gli ingressi vengono chiusi (ingresso di allarme, microswitch interno e antischiuma), la sirena entra
nella fase di pre-attivazione. Durante questa fase, della durata di 30 secondi, i LED della sirena lampeggiano e
la tromba emette dei toni. In prossimità dello scadere dei 30 secondi i LED lampeggiano più velocemente per 3
secondi e la tromba emette un tono lungo ad indicare che la sirena è in condizione operativa.
ATTENZIONE! La sirena diventa operativa solo se i contatti interni di tamper (e antischiuma se presente
GRI/HPA800) sono a riposo, se non sono presenti anomalie rispetto alle selezioni impostate e se
l’ingresso di allarme ALL è a riposo. Se l’ingresso ALL viene attivato (o sbilanciato) dopo il termine del
tempo di pre-attivazione la sirena effettua la suonata ed il lampeggio di allarme ad alta intensità.
Il tempo di pre-attivazione può essere interrotto in qualsiasi momento semplicemente aprendo il coperchio
della sirena o sbilanciando l’ingresso di allarme. La sirena ritornerà quindi nella modalità diagnostica (vedi
paragrafo precedente).
3.3 SEGNALAZIONE DI VARIAZIONE STATO IMPIANTO
La sirena HPA800 visualizza l’inserimento e il disinserimento dell’impianto tramite i 4 LED centrali. E’ inoltre
possibile abilitare la segnalazione acustica di inserimento e disinserimento tramite il DIP B3.
Se non si desidera che la sirena visualizzi le variazioni di inserimento e disinserimento dell’impianto è
sufficiente non collegare il morsetto TC alla centrale di allarme.
Per abilitare la segnalazione acustica di inserimento e disinserimento impianto è necessario posizionare
il DIP B3 in OFF.
Se le segnalazioni di ON/OFF sono abilitate e l’impianto viene disinserito o inserito durante un ciclo di
allarme, le notifiche di inserimento (OFF>ON) e disinserimento (ON>OFF) vengono presentate al termine
del ciclo di allarme. Se l’inserimento (OFF>ON) coincide con l’attivazione dell’ingresso ALL, questo non
viene notificato.
4 LED centrali
(ad alta luminosità)
Tromba
(a basso volume)
Variazione di stato impianto
3 lampeggi brevi
3 toni brevi
inserimento impianto
(OFF>ON)
1 lampeggio lungo
1 tono lungo
disinserimento impianto
(ON>OFF)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron HPA800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron HPA800 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info