741403
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
ELR600RT/10-15-20
5. WALL INSTALLATION
Set the control unit to “Walk Test” mode (see the dedicated instruction manual).
While keeping the RX barrier in the desired position, press the TEST button on the transmitter to check
that it is within radio range of the control unit.
Once the correct position is confirmed, install the RX barrier and then the TX barrier.
Fix both barriers to the wall through the holes in the standard caps and the transmitter holders.
When installation and alignment are completed, close the covers with their screws.
Note: The barriers should be installed with the transmitter holder at the top
Make sure there are no Tamper signals on the control unit.
Set the control unit to “Walk Test” mode and obstruct the individual beams to check that the line-open
(alarm) signal arrives.
Exit “Walk Test”.
6. USING THE OPTIONAL ROTATION KIT
To perform this type of installation, purchase the separate kit code 80SP5G00113.
Insert the rotating spacers included in the KIT in the transmitter holder bases of the RX and TX barriers.
Undo the standard tap cover screws on the RX and TX barriers and remove the covers.
Remove the standard caps.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron ELR600RT-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron ELR600RT-10 in the language / languages: English, Italian as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info