741407

Elkron AS500-RPT Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
14 AS500/RPT
TECHNICAL CHARACTERISTICS
BUS IN - Section
Nominal power voltage
13,8 V⎓ (supplied by control panel BUS)
Expansion operating voltage
9 V⎓ - 15 V⎓
Maximum current draw of expansion at 12 V⎓
(with relays energised, factory setting)
50 mA stand-by with balanced inputs
55 mA with NC inputs
Maximum current draw of expansion at 12 V⎓ (with
relays de-energised)
40 mA with balanced inputs
45 mA with NC inputs
Nominal voltage on pin +V1:
13,2 V⎓ (supplied by control panel BUS)
Max. current that can be supplied from pin +V1:
500 mA (with overload protection)
Nominal voltage on pins +V2:
13,2 V⎓ (supplied by control panel BUS)
Max. overall current that can be supplied from pins +V2:
500 mA (with overload protection)
U1 output relay contact switching max. current and voltage:
1 A – 24 V⎓ with resistive load
Max. current that can be supplied from U2 and U3
electric outputs:
10 mA
Max. total length of control panel-peripheral BUS line
(primary BUS)
400 m
Max. connection length between each sensor or
actuator and expansion
500 m
Max. length of connection between a fast (roller,
shock, ...) detector and the expansion:
100 m
Supplementary power section and BUS OUT
AC Mains
100-240 V~ -15/+10%, 50/60 Hz
Max. current absorption (PS534–MW RS-50-15)
1.3 A
PS534 power output nominal voltage (MW RS-50-15)
type A power supply
14,4 V⎓
Max. current that can be supplied:
3,4 A
Max. current absorbed from power supply / repeater
electronics
100 mA
Allocable battery
12 V – 18 Ah
Battery charging nominal voltage Note 1)
13,8 V⎓
Max. current supply to charge battery
500 mA
Max. time for recharging battery to 80%
48 hours
Battery low threshold
11,5 V
Battery release threshold
10,5 V
Automatic battery test (controlled by control panel)
every 24 hours (with mains)
Max. current for external devices (keypads, sensors, sirens):
taken from + (BUS OUT), +, + terminals
Degree2–with SP2 communication and 12 hrs autonomy
(total 1150 mA, of which 100 mA for electronics)
1050 mA
Nominal voltage on pin +SR Note 3)
14,4 V⎓
Max. current that can be supplied from pin +SR:
200 mA (with overload protection)
Nominal voltage on pin + (BUS OUT)
13,8 V⎓ ±1,5%
Max. current deliverable from + (BUS OUT) terminal
1100 mA (with overload protection)
Nominal voltage on pins +
13,8 V⎓ ±1,5%
Max. total current deliverable from +V terminals
750 mA each (with overload protection)
Max. total length of serial power supply-peripheral
BUS OUT line (secondary BUS)
400 m
Pollution grade
Grade 2
Overvoltage category
CAT II
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron AS500-RPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron AS500-RPT in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info