741469
46
Zoom out
Zoom in
Previous page
1/48
Next page
DS80TH53-001 46
INSTALACIÓN EN TECHO MEDIANTE EL SOPORTE 80TH5600133 Y CAJA DE CONEXIONES 80PS9200133IP66
Decida el punto donde va a instalar la cámara y siga el siguiente procedimiento:
Taladre los agujeros para la fijación dependiendo del tipo de pared (cemento, madera, etc.).
Fije la caja de conexiones al techo.
Abra la caja de conexiones; para ello, desatornille los 4 tornillos de las esquinas de la tapa.
Inserte por el pasacables todos los cables necesarios para el funcionamiento de la cámara. Cuando se instale
en el exterior, asegúrese de que el pasacables es cerrado herméticamente para mantener el grado de
protección IP.
Conecte la red eléctrica a los terminales correspondientes, pero no alimente la caja de conexiones hasta
finalizar la instalación.
Conecte la línea RS-485 a los terminales Rx+ / Rx- marcados con "keyboard".
Conecte los cables de los sensores de alarma a los terminales de entrada 1 y 8 (para obtener más información,
consulte el manual de la caja de conexiones 80PS9200133).
Conecte el cable de vídeo del dispositivo de vídeo (DVR, monitor, etc.) al conector BNC hembra situado dentro
de la caja, teniendo especial cuidado en colocar el aislante protector de goma para que las piezas metálicas no
hagan contacto con la electrónica interna.
Configure los interruptores DIP de la caja de conexiones (para obtener más información, consulte el manual de
la caja de conexiones 80PS9200133).
Cierre la caja de conexiones con los mismos tornillos.
Pase el cable de conexión por el soporte hasta que sobresalga por el lado opuesto y fije el soporte
80TH5600133 a la caja de conexiones colocando la junta de goma en el anillo superior (ver figura) y con los
3 tornillos suministrados
Pase el cable de conexión por el tubo roscado hasta que sobresalga por el lado opuesto.
Enrosque el tubo roscado de extensión al soporte y fíjelo con el tornillo suministrado.
Enrosque el tubo roscado al extremo de la carcasa del domo y fíjela con uno de los dos tornillos suministrados.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TH5300133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TH5300133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info