741456

Elkron 80TC8M00133 Manual

44
Zoom out
Zoom in
Previous page
1/68
Next page
44 DS80TC8M-001
MAIN MENU / FUNCTION / SETUP / COMUNICATION
This menu allows to set up RS-485 parameters: camera identification code, communication protocol and
BAUD RATE. Select this function to access the following submenu:
COMUNICATION
ID 1
PROTOCOL PELCO-D
BAUD RATE 2400 BPS
* SET
RETURN
Function Value Description
ID
1 ÷ 255
Used to set the camera identification code.
PROTOCOL
PELCO-D ÷ PELCO-P
Used to set the communication protocol.
BAUD RATE
2400 ÷ 115200 BPS
Used to set baud rate.
SET
Used to apply the selected settings without leaving the menu.
RETURN
/
It allows to exit from the submenu and go back to the upper level.
NOTE:
o *SET: the asterisk near the function SET indicates that the parameters showed on the display are those
acquired and saved by the camera; if some changes are performed, put the cursor on the function
SET and press the menu button in order the new settings are acquired and saved by the camera.
CAMERA MANAGEMENT WITH CONTROL KEYPAD
The camera can be remotely managed by any control keypad equipped with RS-485 interface (for ex. the
80KP9200133 keypad); in this case, the communication parameters must be manually configured via
camera menu (as above described), in order to match the keypad ones (ID, Protocol, Baud Rate).
From camera menu, that can be accessed by the control keypad, the user can perform all the
customizations, as described in this manual.
Use the following commands:
• PRESET 95 to access to the Menu
• the Joystick to scroll the Menu options and change their values
• FOCUS+ to enter or exit into/from the submenus
NOTE
: For keypad specific functions and access commands, see the control keypad manual.
CLEANING THE DEVICE
• Rub delicately with a dry cloth to remove dust and dirt.
• Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.
• Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to
clean the device to prevent deformation, deterioration or scratches to the paint finish.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC8M00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC8M00133 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info