741458
75
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 75
Option Value Explanation
AGC LEVEL -3dB / 28dB
Active only if AE MODE in MANUAL.
It is possible to automatically control gain (AGC) to one of the indicated values.
This selection is used to manually set the video signal gain.
BRIGHT LEVEL 0 / 31
Active only if AE MODE in BRIGHT.
This function adjusts the camera gain and the iris opening using a special algorithm
which may be programmed by the user. Exposure is controlled by the gain in low
light condition and by the iris opening in bright light conditions.
SPOT AE ON /OFF
If this function is ON, the adjustments only use the middle part of the image.
WDR ON/OFF
If activated (ON), this function allows to improve the images captured by the Dome,
by changing the light balancing to obtain more detailed images.
4.5.4.3 OTHERS submenu of CAMERA OPTIONS menu
Option Value Explanation
SHARPNESS 0 / 15
The sharpness of the image may be adjusted automatically (ON) or
to a level defined in the “SHARPNESS LEVEL” menu
BACKH LIGHT ON / OFF
If enabled (ON), this function increases the image brightness in
backlight conditions.
WB MODE
MANUAL/INDOOR/OUTDOOR
ONE PUSH/ATW/AUTO
The white balancing mode (WB is the acronym of White Balance),
can be chosen using these options.
R GAIN 0 / 255
Active only if BW MODE in MANUAL.
Adjust the red components using this values.
B GAIN 0 / 255
Active only if BW MODE in MANUAL.
Adjust the blue components using this values.
VERTICAL
MIRROR
ON / OFF
If enabled (ON), this function allows to see the images vertically
flipped (180° vertical rotation)
HORRIZONTAL
MIRROR
ON / OFF
If enabled (ON), this function allows to see the images horizontally
flipped (180° horizontal rotation).
IR SW MODE AUTO / COLOR / B/W
The opening and closing of the IR filter which adjusts the Day &
Night vision of the camera may be controlled in MANUAL mode. In
AUTO mode, the switch is automatic according to the lighting.
STABILIZATION ON / OFF
If enabled (ON), this function performs an image stabilization in
case of sudden movements and oscillations of the image.
FUNCTION OSD ON / OFF
If enabled (ON), this function allows to display information about
the camera module with icons, such as zoom percentage and
sensitivity setting.
OTHERS
1 Sharpness 4
2 BackLight OFF
3 WB Mode Auto
4 R Gain Auto
5 B Gain Auto
6 Vertical Mirror OFF
7 Horizontal Mirror OFF
PAGINA 2
8 IR SW Mode Auto
9 Stabilization OFF
10 Function OSD OFF
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info