741458

Elkron 80TC1L00133 Manual

72
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 72
4.5.3 Menu programmazione della telecamera (CONTROL OPTIONS) – Impostazioni visualizzazione e
movimentazione della dome
From the first level menu, choice <CONTROL OPTIONS> to select the options concerning Dome displaying modes and
motions.
Option Value Explanation
DOME ADDR SETUP
Makes it possible to assign the type of addressing and address to the Dome
(see below)
AUTO FLIP ON/OFF
When this option is on, the movements of a subject moving underneath the
camera can be followed by moving the joystick vertically only. This is possible
because after reaching vertical position, the camera will automatically pan by
180 degrees to be repositioned and resume the tilt stroke.
PROPORTIONAL
SPEED
ON/OFF
If this mode is active (ON), the pan and tilt speed applied by the keypad is
proportion to the set zoom so that the movement speed decreases when the
zoom increases.
PAN REVERSE ON/OFF
If this mode is activated (ON), the joystick commands for pan function are
reversed.
TILT REVERSE ON/OFF
If this mode is activated (ON), the joystick commands for tilt function are
reversed.
VECTORSCAN STILL ON/OFF
If activated with ON will be visible only the images referred to the presets
included in the scan sequence, excluding the images of the travel from a preset
to another.
AUTO FOCUS Z/PTZ/OFF
If activated, the Dome will automatically perform the control of images focusing.
If activated with PTZ, the Dome will perform the focusing only during the use of
Pan, Tilt and Zoom functions. If activated with Z, the Dome will perform the
focusing exclusively by using the zoom function.
AUTO AE Z/PTZ/OFF
If activated, the Dome will automatically perform the control of images exposure.
If activated with PTZ, the Dome will perform the control only during the use of
Pan, Tilt and Zoom functions. If activated with Z, the Dome will perform the
control exclusively by using the zoom function. It is possible to change manually
the exposure, by using directly the command from the keyboard PRESET + 60
+ ENTER. If the option is configured with PTZ, the iris control goes back in
automatic mode when the keyboard joystick is used.
VECTORSCAN AF ON/OFF
If activated with ON, the Dome, during the execution of “Vector Scan Still”,
automatically performs the focusing.
- 2 TILT LIMIT ON/OFF
If active with ON, the Dome tilt limit increases of 2 degrees, going from 90° to
92°.
SPEED LIMIT ON/OFF If active with ON, limits Dome speed of movement to half the maximum speed.
CONTROL OPTIONS
1 Dome Addr Setup
2 Auto Flip ON
3 Proportional Spd ON
4 Pan Reverse ON
5 Tilt Reverse ON
6 VectorScan Still ON
7 Auto Focus PTZ
8 Auto AE PTZ
PAGE 2
9 VectorScan AF ON
10 + 2 Tilt Limit ON
11 Speed Limit OFF
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info