741458
57
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 57
3 INSTALLATION PROCEDURE
This section contain detailed instructions for installing Elkron Dome camera. These instructions assume that the installer
has a good knowledge of installation techniques and is capable of adopting safe installation methods.
3.1 ELKRON DOME MINIMUM CONFIGURATION
The ELKDome camera contains a built-in receiver that decodes the controls from the 80KP9200133 control keypad. At
least one keypad is therefore needed to control the camera. In addition to configuring operating parameters, the keypad
is used to manage horizontal axis (360° continuous) and vertical axis (180°) panning and tilting, motorised zooming,
recalling and programming the ELKDome preset sequences.
The ELKDome camera contains a built-in receiver that decodes the controls from the 80KP9200133 control keypad.
3.2 INSTALLATION TYPES
ELKDome cameras can be installed in six ways.
Wall installation using the housing Ref. 80TH5300133 and the standard bracket Ref. 80SP1D00133.
Wall installation using the housing Ref. 80TH5300133 and the standard bracket Ref. 80SP1D00133, with Power
Box 80PS9200133.
Ceiling installation using the housing Ref. 80TH5300133 and the ceiling mounting kit (pendant-mount) Ref.
80TH5600133.
Ceiling installation using the housing Ref. 80TH5300133 and the ceiling mounting kit (pendant-mount) Ref.
80TH5600133, with Power Box 80PS9200133.
Ceiling surface installation using the surface ceiling housing kit Ref. 80TH5500133.
Inside ceiling installation using the false ceiling housing kit Ref. 80TH5400133.
Two adapters for fitting the bracket and IP66 connection box are available. The first is a corner adapter. The first is a
corner adapter (Ref. 80SP2D00133) and the second is a pole adapter (Ref. 80SP3D00133).
The following sections show how to use these adapters.
WARNING
Regardless of the type of installation selected, configure Dome parameters beforehand (protocol, address, baud rate,
termination resistance).
It is advisable to install a power on/off switch for camera maintenance operations.
Check that the specific jumper present on the electronic board is inserted across RS – 485 lines. To access the
electronic board, lift the flap on the base of the housing 80TH5300133 and of Kits 80TH5400133 and
80TH5500133
RS-485 termination jumper.
Place the Jumper on Π in order
to terminate the line if the Dome
is the last of the line.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info