Manual Elite Turno (page 39 of 112) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

782388

Zoom out

Zoom in

1/112

parabolic and this is the reason for the wide range of

available resistance.

To get the most from this range, the training focus

should be more on pedalling cadence rather than speed.

Concentrate on agility, using a higher cadence at a low

power output, by using lower gears. It is also possible

to focus on power by using a lower cadence level with

higher gears, or choose intermediate gearing for a balance

between agility and power.

You can of course adjust to obtain the combination you

desire.

Both amateurs and pros alike can benefit from the wide

range of resistance available with the Turno.

05_ NAME AND LIST OF COMPONENTS

N°1 Turno body (Ref. A)

N°2 Freehub body spacer (Ref. B)

N°1 Chainstay adapter (Ref. C)

N°1 Chainstay left adapter

L=130-135 mm (5,1-5.3 inch) (Ref. D)

N°1 Chainstay right spacer

L=142 mm (5,6 inches) (Ref. E)

N°1 Chainstay left spacer

L=142 mm (5,6 inch) (Ref. F)

N°2 Feets (Ref. G)

* Quick release lever not supplied with this product.

06_MISURO B+

This ELITE Turno includes an integrated sensor that sends

speed, power and cadence data. The hometrainer sends

data using both Bluetooth and ANT+™ protocols.

Many devices (smartphones, tablets, cycle computers,

GPS devices and so on) use Blueooth Smart and ANT+ to

display data – please check your hometrainer compatibility

with the device.

To display data sent via ANT+ you need to have an ANT+

GPS device / cycle computer compatible with the "ANT+

Speed & Cadence" protocol and the "ANT+ Power"

protocol.

A list of devices compatible with one or more of these

protocols is available at the ANT+ website (http://www.

thisisant.com/directory/).

In order to read speed and/or cadence data with a

Bluetooth Smart Ready GPS device / cycle computer, the

device must be compatible with the “Speed & Cadence”

proﬁle for the Bluetooth Smart protocol. In order to display

power data, the Bluetooth Smart Ready cycle computer /

GPS device must be compatible with the “Power” proﬁle

for the Bluetooth Smart protocol.

TRAINING

We suggest using the Turno with the ELITE My E-Training

app, speciﬁcally developed for smartphones and tablets,

though it's also possible to use it with other apps compatible

with the ANT+ and / or Bluetooth Smart protocols.

Moreover, there are several next gen cycle computers /

GPS devices compatible with the ANT+ protocol so they

can display data sent by the Turno without using an app.

You need to set wheel circumference on the device to

calculate speed properly. The circumference to set refers

to your bike's wheel, even if you remove it to use the

hometrainer.

This value changes depending on if you're using the My

E-Training app or another app / device.

With My E-Training you need to set wheel circumference

(i.e.: 2095mm).

If you're using a different app or device the value to set is:

Value=wheel circumference [mm] / 15.34

For instance, with 2095 mm wheel circumference the

value to set is 2095 / 15.34 = 136,6 > 137 mm

NOTE:

- An incorrect hometrainer set-up might cause inaccurate

power data.

- To save energy, the sensor turns off automatically after

a few minutes of inactivity. Start pedalling to reactivate it.

- Cadence from the hometrainer is the result of a calculation

and to obtain precise data your bike's chain needs to be

properly tensed. That's why there are some circumstances

(for instance with low gears) where the value might not be

absolutely precise.

- The hometrainer sends data via both Bluetooth Smart and

ANT+ protocols but you can't use them both concurrently.

Switching between protocols requires a wait for the

internal MISURO sensor to enter low energy consumption

mode (after having been inactive for 5 minutes). The new

protocol can be activated by simply pedaling and the

pairing procedure can then begin.

- The roller is not waterproof. Please be careful of sweat

and do not use abrasive cleaners, as both may damage the

electronic circuit.

- Do not store the roller in a wet or damp environment that

could damage its electronic components.

07_ASSEMBLING

- Disassemble the Turno body (Rif. A)

- Place the Turno body (Rif. A) vertically as indicated (Pic.1)

and hold it in place with the upper handle

- Rotate the foot tube 90° and place it in the proper bracket

welded to the leg (Pic. 1 and Pic. 2).

- Tighten the safety knob (Pic. 3).

- Spread the leg until you can hear the safety lever click

(Pic.4 and Pic. 5).

- (Pic. 6) shows the installation of feet (Rif. G) on the Turno

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elite Turno in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elite Turno Manual

Product: