534688
47
Zoom out
Zoom in
Previous page
1/96
Next page
45
Using the 3D Glasses with Power Supply
If you slide the switch to 3D or 2D after taking steps 1
and 2 in Recharging the 3D Glasses (see page 44),
you will be able to supply power to the 3D Glasses
while using the glasses (battery will not be recharged).
Do not move around while wearing the 3D Glasses. Doing
so may result in getting your feet caught in the USB cable,
the TV falling or other accidents that may cause injury.
When you supply power to the 3D Glasses, only connect
a USB cable (commercially available) to a USB terminal on
the TV.
When you use the USB cable connecting the 3D Glasses,
be careful not to get your feet caught in the USB cable.
It may result in falling or other accidents that may cause
injury.
Removing the Battery for Recycling
The following instruction and procedure is provided
solely as a guide for the safe removal of the Li-ion
battery for proper disposal. This product is not
repairable. Do not attempt to replace the battery;
once the 3D Glasses are taken apart, they cannot
be reassembled or used again.
- Please take special care in handling small parts such as
screws specially around children that can accidentally
swallow them.
- Be very careful in handling the battery to prevent it from
leaking.
- Do not attempt to dismantle or puncture the battery.
- Do not use this battery for any other purpose. Recycle
properly after removing it from the 3D Glasses.
If you have any question regarding proper recycling
please call 1-800-822-8837 (see page 50 for more
details).
1
Pull out the nose pad with your fi ngers.
2
Remove the fi ve screws with a Phillips screwdriver
(commercially available).
Enjoying 3D Image Viewing
3
Pull the front casing outward with your fi ngers while
pulling the base of the right temple arm inward with
your fi ngers (
s
).
1
Front casing
2
Base
3
Right temple arm
4
Cut off the three cables of the rechargeable battery
unit one by one with a pair of scissors.
There is the rechargeable battery unit inside
2
on the
right temple arm shown below.
Insulate the tip of the removed rechargeable battery
cables, with material such as electrical tape, be sure
to insulate all three battery cable tips to prevent the
conductor wires from touching each other.
1
Right temple arm
2
Rechargeable battery unit
3
Rear casing
5
Pull out the entire rechargeable battery unit and
remove it from the rear casing.
Used batteries should be handled in accordance with local
laws and regulations.
PRO-70_60X5FD_E_04.indd 45PRO-70_60X5FD_E_04.indd 45 2011/07/08 15:34:212011/07/08 15:34:21
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elite PRO-60X5FD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elite PRO-60X5FD in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info