Manual Elite Novo Frame (page 13 of 40) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

782391

Zoom out

Zoom in

1/40

Thank you for choosing the Novo

01_GENERAL SAFETY WARNINGS

Before using your trainer, carefully read

the warnings listed below for your health

and safety.

1. The appliance is not to be used by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction.

2. Children being supervised not to play

with the appliance.

3. Before beginning a training programme,

undergo a physical examination certifying

good health.

4. Choose a training level compatible with

your physical endurance and the status of

your health.

5. If you feel particularly fatigued or sore

while exercising, stop using the trainer

immediately and consult your doctor.

The above warnings are general and not

exhaustive of all the precautions that

should be taken for the proper and safe

use of the trainer; which is solely the

responsibility of the user.

02_PRODUCT MODIFICATIONS

Also in view of any technical update, ELITE reserves

the right to make changes to the products or their

speciﬁcations without being obliged to notify or inform the

Customer beforehand for:

a) changes that do not affect negatively the product

performance;

b) changes required to meet or improve the product

speciﬁcations;

c) changes necessary for the products to comply with the

applicable legal requirements.

ELITE also reserves the right to supply these products with

these improvements without being obliged to or responsible

for applying the same modiﬁcations to any previously

purchased products, reserving also the right to change

prices and model availability according to market

conditions, component availability and other corporate

considerations.

03_INTRODUCTION

Check the presence of all the following components:

N°1 Novo frame (Ref. A)

N°1 Unit (Ref. B)

N°1 Unit support (Ref. C)

N°1 Quick release (Ref. D)

N°2 Plugs for wheels larger than 28” (Ref. E)

N°1 Screw (Ref. F)

N°2 Washer (Ref G)

N°1 Nut (Ref H)

N°1 Fixing lever (Ref I)

ATTENTION

Resistance unit depicted here may vary from production

models

04_STAND ASSEMBLY

• Open the stand and position it on aﬂat surface.

• Remove the screws (F+G+H) on the stand (Fig.1).

• Take the unit support (C), press the two buttons on the

upper part of the support (Fig. 2) with ﬁngers, and ﬁt it

inside the two holes in the frame (Fig.3 and Fig.4)

• Using the screw shown in Fig.1 (F+G+H), ﬁt the unit

support (C) on the respective frame (Fig.5). Use the

correct tightening force, otherwise the unit support will be

prevented from turning.

05_UNIT INSTALLATION

• There are two pairs of holes in the base of the support;

use the various holes according to the bicycle wheel:

1) for wheels ≥ 24” ÷ ≤ 26”, front pair of holes (Fig. 6);

2) for wheels ≥ 28”, rear pair of holes (Fig.7).

• Depending on the wheel, tighten the M6 screws (Fig. 8

and Fig. 9).

• For bicycles with wheels larger than 28” it is necessary

to operates on the frame, changing the plugs of the front

uprights with the oversize plugs provided (E). These differ

for the stand opening angle.

ATTENTION: This operation must be carried out with the

unit removed from the support.

• Remove the screws from both front uprights (Fig.10 and

Fig.11).

• Remove the plug, using a screwdriver if necessary Fig.

12.

• Insert it inside the seat specially created in the plug and

prise, pushing the screwdriver downward and the plug

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elite Novo Frame in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elite Novo Frame Manual

Product: