782459

Elite Drivo II Manual

46
Zoom out
Zoom in
Previous page
1/127
Next page
50
EN
operation of the Drivo II due to such interference.
Do not expose the Drivo II to direct sunlight for long periods
when they are not in use.
15_PRODUCT MODIFICATIONS
Also in view of any technical update, ELITE reserves
the right to make changes to the products or their
specifications without being obliged to notify or inform the
Customer beforehand for:
a) changes that do not affect negatively the product
performance;
b) changes required to meet or improve the product
specifications;
c) changes necessary for the products to comply with the
applicable legal requirements.
ELITE also reserves the right to supply these products
with these improvements without being obliged to or
responsible for applying the same modifications to any
previously purchased products, reserving also the right to
change prices and model availability according to market
conditions, component availability and other corporate
considerations.
16_DISCLAIMER
Elite S.r.l. is not liable for any temporary or permanent
damage to the physical integrity of the user, whether direct
or indirect, resulting from the use of the trainer.
17_NAME AND LIST OF COMPONENTS
Your Drivo II electronic trainer is made of the
following components:
N°1 Drivo II body (Ref. A)
N°2 Freehub body spacer (Ref. B)
N°1 Chainstay adapter (Ref. C)
N°1Left chainstay adapter
L=130-135 mm (5,1-5.3 inches) (Ref. D)
N°1 Right chainstay spacer adapter
L=142 mm (5,6 inches) (Ref. E)
N°1 Left chainstay spacer adapter
L=142 mm (5,6 inches) (Ref. F)
N°1 Power supply (Ref. G)
N°1 Quick release (Ref. I)
N° 1 Left leg (Ref. L)
N° 1 Right leg (Ref. R)
N° 1 Central support (Ref. O)
N° 2 TBEI M6x60 screws (Ref. P)
N° 6 M6 washers (Ref. Q)
N° 2 M6 nuts (Ref. S)
N° 2 TBEI M8x35 screws (Ref. T)
18_ASSEMBLING THE DRIVO II
- Disassemble the Drivo II body (Ref. A)
- Place the Drivo II body (Rif. A) vertically as indicated
(Pic.1) and hold it in place with the upper handle
- Spread the leg until you can hear the safety lever click
(Pic.2 and Pic. 3).
- Place the home trainer on a flat surface and insert the
side legs (Ref. L and Ref. R) (Pic. 4).
- Screw the M8x60 screws with the washers and the M8
nut (Ref. P – Q – S ) until it touches the side legs and starts
rotating them (Pic. 5).
- Spread the side legs (Ref. L - Ref. R ) to its max extent
(Pic 6).
-The centering pin must be aligned with the bracket holes
(Fig. 7).
- Tighten the safety knob (Pic. 8).
- Insert the central support (Ref. O)(Pic. 9)
- Tighten the screws + M8 washers (Ref. T- Q)(Pic. 10)
- Make sure the hometrainer is stable (Pic 11), otherwise
operate on the adjustable feet (Pic 12A - 12B).
- Warning! the central support must remain at least 3 mm
above ground (Pic. 13).
19_INSTALLING THE SPROCKET CASSETTE
ON THE DRIVO II FOR M5 L=130 MM AND
L=135 MM CHAINSTAYS
- Assemble the sprocket cassette on the freehub by
aligning the groove profiles.
- 2 spacers (Ref. B) are usually needed for the Shimano®
/ SRAM® 9 speed cassette (Pic. 14), 1 spacer for the 10
speed cassette (Pic. 15) and no spacer is required for the
11 speed cassette (Pic. 16). Depending on the cassette
brand you are using there might be some differences with
the aforementioned general data.
- Using the torque wrench, tighten the lock ring supplied
with the cassettes onto the freehub body (Pic. 17).
CAUTION!
Strictly follow the instructions provided by the cassette
manufacturer with regard to specific installation
techniques, the need for additional spacers and torque
specifications.
NOTE: please contact your dealer if you have questions or
are unable to install the cassette. The warranty does not
cover any damage to the bicycle and/or Drivo II in the event
of incorrect installation.
- Drivo II includes the correct 5mm diameter quick release
adapter for dropout spacing ranging from 130mm (5,1
inches) to 135mm (5,3 inches). Therefore, on bikes with
130-135mm (5,1 to 5,3 inches) dropout spacing, insert
the left dropout adapter (Ref. D) (Pic. 18). Please consult
the paragraph 21 for bikes with 12mm diameter (0.47 in.)
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elite Drivo II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elite Drivo II in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info