Manual Elite Arion Mag (page 11 of 36) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

782482

Zoom out

Zoom in

1/36

Thank you for choosing the ARION MAG

roller

01_GENERAL SAFETY WARNINGS

Before using your trainer, carefully read the warnings listed

below for your health and safety.

1. The appliance is not to be used by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction.

2. Children being supervised not to play with the appliance.

3. Before beginning a training programme, undergo a

physical examination certifying good health.

4. Choose a training level compatible with your physical

endurance and the status of your health.

5. When using the trainer, select a training program and

adjust it so that it is compatible with your fitness level and

health.

6. If you feel particularly fatigued or sore while exercising,

stop using the trainer immediately and consult your doctor.

The above warnings are general and not exhaustive of all

the precautions that should be taken for the proper and

safe use of the trainer; which is solely the responsibility of

the user.

02_INSTRUCTIONS FOR USE

The roller is a training tool enabling users to get into top

shape for cycling.

Its incorporated magnetic resistance unit featuring three

levels offers smoother and more even and gradual

resistance.

The rollers, of technopolymer material, are specially

shaped to guarantee better control of pace.

High quality cylindrical bearings ensure many years of

trouble free and quiet operation.

The frame of the ARION MAG is very practical, light,

manageable, easy to use and takes up little space.

Frame can be folded for easier storage or carrying.

It is recommended for users of all levels.

IMPORTANT

Pay attention to the position of hands when closing the

roller, to avoid squashing them between the two side

members

03_NAME AND LIST OF COMPONENTS

N°3 Side members Ref. A

N1 Longitudinal member with resistance Ref. B

N°4 Rectangular covers Ref. C

N°1 Slider positions 0-1-2 Ref. D

N°1 Front roller Ref. E

N°1 Middle roller Ref. F

N°1 Rear roller Ref. G

N°1 Drive belt Ref. H

N°1 Allen key Ref. I

04_ASSEMBLY

Your ARION MAG roller should arrive fully assembled,

checked and ready for use.

05_USE

Before starting to use your ARION MAG it is necessary to

adjust the centre distance of the rollers to make them

compatible with your bicycle’s wheelbase.

This adjustment must be carried out as follows:

1) Measure the distance between the centres of the wheels

of the bicycle to be used on the ARION MAG (Fig.2). We

will call this dimension “X”.

2) The distance from the intermediate point between the

two rear rollers to the middle of the ARION MAG front roller,

which we will call “Y” (Fig.3), must match or be as near as

possible to dimension “X” . The axle of the ARION MAG

front roller must be positioned in the hole of the ARION

MAG frame whose measurement given on the graduated

scale is closest to dimension “X” (Fig.4).

ATTENTION: Dimension “Y” must be equal to or slightly

greater than “X”. The rollers can be adjusted to adapt them

to bicycles whose wheelbase is 944-1124 mm (37 to 44

inches).

3) To change Y it is necessary to shift the front roller E.

4) Fold the ARION MAG until the drive belt H slackens.

5) Loosen the drive belt H , making it come off the

respective front and rear guides.

6) Unfold the ARION MAG back into the open position.

7) Remove the rectangular covers C from both front

longitudinal members (with aid of a screwdriver if

necessary), and the screws and washers from the front

roller on both sides, using the Allen key I) supplied (Fig. 5).

8) Pull the roller out from its original position.

9) Position the roller in the appropriate seat in the holes in

the frame, so that X matches Y.

10) Refit the screws and the washers in the special holes,

but do not tighten them down.

11) Close the ARION MAG, position the drive belt H on the

guide of the front roller E and middle roller F.

12) Unfold the ARION MAG into open position again.

13) Check the position of the front roller E , putting your

bicycle on the rollers and checking that the axle for the

front wheel sits directly above the front roller.

14) Once the front roller E is positioned, tighten the

screws (do not over-tighten as this could warp the side

members).

15) Close the sides with the rectangular covers C. The

ARION MAG is now ready to use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elite Arion Mag in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2.86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elite Arion Mag Manual

Product: