499841
18
Zoom out
Zoom in
Previous page
1/32
Next page
18 457
i
gb
FUNZIONAMENTO 2 STELLE
FUNCTIONING 2 STARS
fig. 11
SBRINAMENTO
La brina che si forma sulle griglie di raffreddamento deve essere tolta quando lo
strato raggiunge uno spessore di circa 3-4 mm. perché altrimenti peggiora la trasmis-
sione del freddo e aumenta il consumo di energia. La rimozione dello strato di brina
deve essere effettuata usando l’apposito raschietto di plastica in dotazione
AVVERTENZA: non usare dispositivi | meccanici o altri metodi artificiali per accellerare il
processo di sbrinamento, diversi da quelli raccomandati dal costruttore .
Tale operazione e necessaria per garantire il buon rendimento del frigorifero ed evitare un
inutile maggior consumo di energia elettrica.
Per ottenere lo sbrinamento del frigorifero, premere il pulsante situato al centro della manopo-
la del termostato, senza spostarne la posizione (Fig. 11). L’acqua convogliata nell’apposito
recipiente, viene eliminata facendola colare dal foro, posto sul fondo, dopo aver rimosso il
tappo. Questa operazione va effettuata subito dopo aver premuto il pulsante, avendo cura di
porre al di sotto del foro, un recipiente della capacita di almeno 3/4 di litro. Si ha il reinserimento
DEFROSTING
The frost which forms on the cooling grids must be removed when the layer reaches a
thickness of around 3-4 mm. If this is not done, the transmission of cold is less efficient
and energy consumption is increased. The layer of frost must be removed using the
special plastic scraper supplied.
WARNING: do not use mechanical devices or other artificial means to accelerate the
defrosting process, other than those recommended by the manufacturer.
Such cleaning is very important to guarantee a good operation of the refrigerator and
avoid useless energy consumption.
In order to defrost the refrigerator, press the push-button situated at the centre of: the
thermostat knob, without changing its position (Fig. 11).
The water conveyed in the tray is eliminated by letting it drip out of the hole, placed at
the bottom, after removing the tap.
automatico dell’apparecchio appena terminato lo sbrinamento.
This operation is to be done directly after the push-button has-been pressed, taking care
to place a container with a capacity of a least 3/4 liters, under the hole. At the end of the
defrosting operation the refrigerator automatically starts running.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elin KSKGA20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elin KSKGA20 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info