499837

Elin KSGIA2040 Manual

4
Zoom out
Zoom in
Previous page
1/36
Next page
4 455
i
gb
REVERSIBILITÁ APERTURA PORTA (da effettuarsi prima di inserire il congelatore nel mobile)
B- MODEL WITH A PLATE BASE:
The
direction in which the door opens can be reversed on all our models to fit in with
your kitchen design . The instructions are as follows:
1 - Tip up the freezer using the special spacers so as not to damage the condenser or
the compressor.
2 - Remove the base screws 1 and 2.
3 - Remove the two side sleepers by unscrewing the three clamping screws and remove
ledge (E).
4 - Unscrew the lower hinge (A) and remove the door.
5 - Unscrew the bushes (B) and (C) and remount them on the opposite side.
REVERSING THE DOOR (to perform before placing the freezer in the piece of furniture)
6- Unscrew the upper hinge pin (D) and remount it on the opposite side.
7 - Unscrew the pin 3 of the hinge (A) and remount it on the same hinge in the opposite
position.
8 - Remount the door and screw the lower hinge in the other side.
9 - Remount the two side sleepers (see n. 3) reversing the position of ledge (E).
10 - Remount the base screws 1 and 2.
11 -Reverse upper and lower guide pin (F). The holes should be filled in with the caps
provided.
N.B. If the appliance is provided with two lower hinges, follow the instructions at pag.1
“MODEL WITHOUT A BASE” .
B -MODELLO CON ZOCCOLO IN LAMIERA:
Tutti i modelli sono predisposti per l’inversione dell’apertura della porta, per un più
coordinato allineamento con l’arredo cucina. Per effettuare l’inversione della porta pro-
cedere nel seguente modo:
1 - Coricare il congelatore dalla parte dello schienale usando appositi spessori per
evitare lo schiacciamento del condensatore e il danneggiamento del gruppo com-
pressore.
2 - Svitare le due viti 1 e 2 dello zoccolo.
3 - Smontare le due traverse laterali togliendo le tre viti di fissaggio e liberare il listello
E.
4 - Smontare la cerniera inferiore A e liberare la porta.
5 - Smontare le bussole B e C e rimontarle su/ lato opposto.
6 - Svitare il perno cerniera superiore D e montarlo su/ lato opposto.
7 - Svitare il perno 3 della cerniera A e rimontarlo sulla stessa cerniera in posizione
opposta.
8 - Montare la porta e fissare la cerniera inferiore su/ lato opposto.
9 - Rimontare le due traverse laterali come indicato al punto 3 invertendo la posizione
del listello E.
10 - Rimontare le due viti 1
e 2 dello zoccolo.
11 - lnvertire la posizione del supporto guida traino F sia inferiore che superiore.
Richiudere i fori con i tappini in dotazione.
N.B.. Se l’apparecchio è provvisto di due cerniere inferiori procedere come illustrato a
pag. 1 per il modello SENZA ZOCCOLO.
E
F
B
A
D
C
3
A
1
2
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elin KSGIA2040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elin KSGIA2040 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info