499836

Elin KSA1454 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6 457
i
gb
Livellare il frigorifero agendo sugli appositi piani regolabili (fig. 3).
Controllate che l’apparecchio non sia danneggiato. I danni subiti durante il trasporto
devono essere segnalati al Vostro Rivenditore entro 24 ore dal ricevimento. Nell’instal-
lare l’apparecchio occorre osservare i seguenti punti:
A) Non installatelo vicino a sorgenti di calore come stufe, termosifoni, cucine etc. ed
evitare la sua esposizione alla luce diretta del sole.
B) Sistemate l’apparecchio in un posto asciutto e ben aereato.
C) Non installatelo in spazi non areati come nicchie o rientranze del muro.
D) Assicuratevi che durante lo sbrinamento automatico l’acqua che scorre lungo la
parete posteriore della cella sia convogliata nell’apposito canale di scarico.
E) Non coprite mai la griglia d’aerazione sistemata sulla parte posteriore del piano
di lavoro (table top) fig. 5.
F) Se l’apparecchio e dotato di distanziali (Fig. 4) applicateli sulla parte superiore
del condensatore posto sulla parete posteriore.
G) Dopo aver installato l’apparecchio nel luogo prescelto, lasciatelo fermo per circa
un’ora prima di collegarlo alla presa di corrente.
H) Prima di immagazzinare i cibi, assicuratevi del perfetto funzionamento del-
I’apparecchio .
Lasciare una distanza di almeno 5 cm fra la parte superiore dell’apparecchio ed
eventuali pensili.
MONTAGGIO GRIGLIA DI AREAZIONE (FIG. 5)
Il montaggio di suddetto particolare, posto sopra il condensatore, viene effettuato per
mezzo di tre viti, che troverete in dotazione all’interno del frigorifero.
Durante tale operazione e importante far incastrare il foglio di laminato nell’asola ap-
posita della griglia di areazione.
ATTENZIONE: mantenere libere da ostruzioni le aperture di ventilazione nell’invo-
lucro dell’apparecchio o nella struttura da incasso.
Level the appliance by turning the adjustable feet (fig. 3). Check that the appliance is not
damaged.
Transport damage must be reported to your dealer within 24 hours of receipt of the
appliance. When installing the appliance the following points must be taken into consid-
eration:
A) The appliance should not stand in direct sunlight or close to high temperature heat
sources such as heaters, radiators or cookers.
B) The appliance should be located in a well ventilated, dry space.
C) Do not install the refrigerator in poorly ventilated locations such as niches and wall
recesses.
D) Make sure that during automatic defrosting the water dropping on the back wall is
channelled into the proper de frost water drain hole.
E) Under no circumstances should the ventilation grid at the back edge of the work
surface ever be covered (fig. 5).
F) If the refrigerator is supplied with wall spacers fit these to the back side of the
appliance at the top of the condenser (fig. 4)
G) Having installed the appliance in the selected position it should be left to stand Q
for one hour before connecting to the: power supply H) Check that the appliance is
operating correctly before storing any food.
Leave at least 5 cm between the top of the appliance and any other shelves.
ASSEMBLY OF THE VENTILATION GRID (FIG. 5)
The above, which is placed over the condenser, is assembled with three screws which
are supplied in a packet inside the refrigerator During assembly ensure that the laminate
sheet is wedged firmly into the appropriate slot on the ventilation grid.
WARNING: Keep ventilation openings in the appliance enclosure or in the structure for
building in , clear of obstruction.
INSTALLAZIONE
INSTALLATION
fig. 3
fig. 5
fig. 4
Componente facoltativo (Solo modello tavolo)
Optional component (Table model only)
Wahlweises Element (nur für Tischmodelle)
Composant facultatif (Seulement modèle table)
Componente facultativo (Sólo modelo mesa)
Componente facultativo (Apenas para modelo mesa)
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elin KSA1454 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elin KSA1454 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info