649805

Elica Spot Plus Island Manual

17
Zoom out
Zoom in
Previous page
1/148
Next page
17
Operation
Use the high suction speed in cases of concentrated kitchen
vapours. It is recommended that the cooker hood suction is
switched on for 5 minutes prior to cooking and to leave in
operation during cooking and for another 15 minutes
approximately after terminating cooking.
1 = ON/OFF – Speed increase
2 = Lights ON/OFF
3 = Selection of the desired function
4 = Setting the function in use
5 = The display shows:
a – list of available functions
b – indicator of the function currently in use
c – indicator of the speed in use
d – clock / data related to the function in use
e – saturation of the anti-grease filter
f – saturation of the carbon anti-odour filter
Available functions
SPEED
Switch on/Speed increase:
- press button 1 to switch on the hood
- press button 1 to go to the next speeds, until the hood is
switched off
The extraction speed is shown on the display (c), in the
following manner:
1st speed
performance 40%
***
2nd
speed
performance 60%
***
3rd
speed
performance 80%
***
high
speed
performance 100%
***
OFF
*** the percentage displayed refers to the indicative value of the
performance
The high speed is timed for 10 minutes; to interrupt the timing
and switch off the hood press button 1.
NB= the speed might increase automatically during use, this is
because the control is fitted with a system that protects the
display in case of overtemperatures.
CLOCK
To set the clock:
- press button 3 until moving the indicator(b) on function
“CLOCK”
- press button 4 to access clock setting
- keep button 4 pressed:
• keeping it pressed for one second increases the time by
one minute
• after 10 seconds, each second it is pressed increases the
time by 10 minutes
To store the set time:
- press button 3
TIMER
Stopwatch Function
- press button 3 until moving the indicator(b) on the “TIMER”
function
- press button 4 to access timer setting
- to start the stopwatch: simultaneously press button 3 and
button 4, for 5 seconds
- to stop the stopwatch: simultaneously press button 3 and
button 4, for 5 seconds
Note= after 60 minutes the stopwatch stops automatically
“Countdown” Function
- press button 3 until moving the indicator(b) on the “TIMER”
function
- press button 4 to access timer setting
To set the “Countdown” timer:
- keep button 4 pressed:
• keeping it pressed for one second increases the timer by
one minute
• after 10 seconds, each second it is pressed increases the
timer by 5 minutes
To save the “Countdown” timer
- press button 3
The Timer indicator(b) will start flashing to indicate the
start of the “Countdown”
When the “Countdown” reaches “0:00” the motor is
switched off
Note = to set a new timer, button 4 must be pressed until the
indication “0:00” is displayed again
Note = the maximum countdown setting time is 60 minutes
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elica Spot Plus Island at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elica Spot Plus Island in the language / languages: All languages as an attachment in your email.

The manual is 7,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info