en
38
Installation instructions
Now screw the hood’s base frame 1 to the hood 3 with
two M6x16 counter sunk screws and two M6 grub
screws; if required, adjust hood (fig. P).
Connect the control cable (plug connection) and light-
ing cable (plug connection) to the power supply (fig. r).
Make sure that the cables do not touch, rub against
each other or get trapped when the hood is extended/
retracted.
Screw the housing cover back onto the hood’s base
frame 1 fig. s.
Connect the pipe connection 8, extraction hose and
fan motor 11 using the supplied hose clips (fig. below).
Connect the fan motor cable 11 to the control 4 (plug
connection (fig. below).
Plug the power cable into the socket and test the hood
(please refer to the operating manual for information
on testing the hood).
