649924
17
Zoom out
Zoom in
Previous page
1/169
Next page
17
Assembly
Before starting the installation:
After unpacking the product, check that it was not damaged
during transport and in case of problems, contact your dealer
or Customer Service, before proceeding with the installation.
Check that the product is of the right size for the installation
location.
Check for accessories inside the packaging (placed there for
ease of transport) such as bags containing screws, the
warranty card, etc. Remove them and keep them safe.
Also verify that near the area of installation there is an
electrical socket
Preparing the cabinet for installation:
- As the bottom of the product must not be accessible after
installation, a separator panel must always be installed (for
protection) under the hob (not supplied with the product), if it is
accessible after installation.
- If installing an oven under the top, do not interpose the
separator panel.
- If an oven is positioned under the induction hob it is preferable
that it is equipped with a cooling fan.
- Do not use the induction hob while the PYROLYTIC cleaning
of the oven is in operation.
- Avoid installing the hob above dishwashers or washing
machines so that the electronic circuits do not come into
contact with steam and moisture which could damage them.
- The distance between the bottom of the device and the
partition panel (or any device installed below the induction
hob) must comply with the sizes indicated.
- To correctly operate the product, do not obstruct the minimum
opening between the worktop and the upper side of the
cabinet top.
- For adequate ventilation and to allow fresh air to circulate,
there must be openings in the kitchen cabinet, following the
dimensions indicated.
- Cut the cabinet before inserting the hob and carefully remove
shavings or sawdust.
Fig. 1a/1b
ATTENTION! Failure to install screws and fasteners in accordance
with these instructions may result in electrical hazards.
Operation
Control panel
The hob has a smart and sophisticated wireless
communication system, able to communicate with some
special connectible Elica hoods. Depending on the use of the
hob and what you are cooking, such hoods receive
information from the surface, process it and automatically and
optimally activate so as to eliminate any waste. See
www.elica.com
to check the range of hoods connectible
with your hob.
Note: To select the commands, simply touch (press) the
symbols representing them.
Main Functions
1. Hob ON/OFF function
2. “Chef Cook” Function
3. “Lock” Function (if pressed together with 2.)
4. Timer activation (if pressed together with 5.) /Timer
Increase
5. Timer activation (if pressed together with 4) /Timer
Decrease
6. Timer display
7. Pre-set operating level (power) selector
8. Cooking zone display
9. Operating level (power) adjustment and cooking
zone selection bar.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elica Lien Diamond 874 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elica Lien Diamond 874 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info