784509
34
Zoom out
Zoom in
Previous page
1/224
Next page
33
Operation
Control Display A
P1. Intake panel opening/closing button
P2. Light ON/OFF button
P3. WiFi connection button
P1. Intake panel opening/closing button
If the panel is CLOSED, by pressing button P1, the hood will
turn on and the intake panel will be raised.
This operation will also give access to control display B,
which manages motor and lighting.
If the panel is OPEN, by pressing button P1, the hood will turn
off and the intake panel will be closed. This operation stops all
active motor and lighting functions immediately.
Note: With the panel closed or while it is moving, control
display B will remain deactivated. When the panel is
completely open, it will be possible to use display B.
P2. Light ON/OFF button
If the panel is CLOSED, by pressing button P2, the hood will
turn on, the intake panel will be raised and the lights will turn
on only when the pull-out hood is completely open.
If the panel is OPEN, it will only be possible to turn the hood
lights on and off.
Note: Light button P2 does not manage Light Dimming and
does not turn the hood off.
P3. WiFi button
WiFi configuration: if the WiFi function is not configured,
press for about 2 seconds to enter WiFi configuration mode
and follow the instructions on the App to complete the
procedure.
During the configuration procedure, the button will light up
indicating the connectivity status (see WiFi status table)
To interrupt the WiFi configuration procedure, press for about
2 seconds when the button is lit up and is flashing fast.
Once the WiFi function has been configured, if you want to
change it, press for about 6 seconds to reset the WiFi
parameters (the button will turn off) and repeat the
configuration procedure.
WiFi activation/deactivation: after the configuration, it is
possible to deactivate/activate the WiFi function. Press for
about 2 seconds to deactivate/activate the WiFi function.
Deactivating the function does not cause the loss of the WiFi
parameters.
WiFi status table
WiFi button
Device connection status
Light off
WiFi not configured or off
Light on steady
WiFi connected
Light flashing fast
Attempt to connect to the
WiFi router
Light flashing
slowly
Attempt to connect to the
Elica cloud
Light on with short
flashing light
Remote command being
received (e.g. engine
ignition or light turned on)
Control Display B
T1. Light ON/OFF button
T2 . Decrease intake speed / motor off button
L1. Speed indicator LED on
T3. Motor on / increase intake speed button
T4 . "BOOST” – intensive speed - function button
T1: Light ON/OFF button
to turn the light on and off.
Press and hold button T1 to increase / decrease the intensity
of the light.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elica Get Up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elica Get Up in the language / languages: All languages as an attachment in your email.

The manual is 8.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info