820571
7
Zoom out
Zoom in
Previous page
1/56
Next page
The following Functions can be Deactivated / Activated
CHILD PROOF
PROGRAM MODE
THERMOSTATIC MODE (also deactivates PROGRAM MODE)
ECO MODE
LIGHT / DIMMER OPERATION
CIRCULATING FAN OPERATION
AUXILIARY FEATURE (2ND BURNER FEATURE)
COUNTDOWN TIMER
NOTICE
Wiring of valve and Receiver must be completed before starting
ignition. Failure to do so could damage the electronics.
NOTICE
The Handsets and Receivers are not interchangeable
with previous electronics.
To avoid damaging the electronics, do NOT use metal tools
to remove the batteries from the Handset / Receiver.
Without using a mains adapter, battery replacement is recom-
mended at the beginning of each heating season.
Old or dead batteries should be removed immediately. If left
in the unit the batteries can overheat, leak, and / or explode.
Do NOT expose batteries (including during storage) to direct
sunlight, excessive heat, re, moisture, or severe impact. Each
of these conditions can cause the batteries to overheat, leak,
and / or explode.
Batteries must be kept within their recommended temperature
limits (ambient battery temperature range: 32 °F to 131 °F /
0 °C to 55 °C).
New and old batteries and different brands of batteries should
not be used together. Mixing of various batteries can cause
the batteries to overheat, leak, and / or explode.
TECHNICAL DATA
AMBIENT TEMPERATURE RANGE
CSA: Handset: 32 °F to 131 °F
CE: Handset: 0 °C to 55 °C
RADIO FREQUENCY
CSA: 915 MHz for U.S. and for Canada (Handset, Receiver)
CE: 868 MHz for Europe (Handset, Receiver)
POWER SUPPLY
Handset: 2 x 1.5 V “AAA” (quality alkaline recommended)
GENERAL NOTES
Batteries – Handset
Low battery indicator on Handsets.
Software Version
Press and buttons simultaneously. Software version is dis-
played.
Handset Model Number
Press and buttons simultaneously. Handset model number
is displayed.
Program Mode
Countdown Timer
HANDSET
The Symax system combines new technology and a modern
design with ease of operation. Instead of scrolling through a
confusing menu, each function can now be activated by touch-ing
a symbol. Many remote controls on the market have few buttons
and require extensive programming to operate.
The Symax System uses the same easy-to-operate logic – find
the symbol for the function you want and touch that symbol – but
the Symax now has new tactile buttons for an immediate, positive
response.
1. Install batteries. All icons are displayed and flashing.
2. While the icons are flashing, press the relevant function
button and hold for 10 sec.
3. The function icon will flash until deactivation is
complete. De-activation is complete when the function
icon and two horizon-tal bars are displayed.
1. Install batteries. All icons are displayed and flashing.
2. To activate a function, press the relevant button and
hold for 10 sec.
3. The function icon will continue to flash until activation is
complete. Activation is complete when the function icon
is dis-played.
Handset One Button and Two Button Ignition
Change from one button to two button ignition (Default Setting)
or vice versa by pressing and holding button for 10 sec. imme-
diately after installing batteries. is displayed and or
(One
or Two Button Ignition
) is ashing. When change is complete
changes to or vice versa.
Deactivate Functions
NOTE: If a deactivated button is pressed, there is no function,
and two horizontal bars are displayed.
NOTE: Deactivation remains in effect after change of batteries.
Activate Functions
USER MANUAL
7/56
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Element4 SKY serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Element4 SKY serie in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Element4 SKY serie

Element4 SKY serie User Manual - Dutch - 16 pages

Element4 SKY serie Installation Guide - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info