820615
14
Zoom out
Zoom in
Previous page
1/56
Next page
A new version of the Wi-Fi Box has been created. The im-
provements include faster processing speed, new Wi-Fi chip, and
best of all for the customer, an uncomplicated and much shorter
App Setup menu for the ProControl app. The new Wi-Fi Box also
has variable power supply between 5 and 24 volts, two RGB
outlets, identical connectors on both ends of the cable, and
the Wi-Fi Box itself has a much smaller footprint for easy
installation in tight spaces.
TECHNICAL DATA
AMBIENT TEMPERATURE RANGE
CSA: myfire Wi-Fi Box: 32 °F to 140 °F
CE: myfire Wi-Fi Box: 0 °C to 60 °C
RADIO FREQUENCY
CSA + CE: 2.4 GHz
Power Supply
Wi-Fi Box: 6 V connection to the Receiver which is connected
to an AC mains adapter.
WI-FI BOX
WPA2 authentication
AES 256-bitencryption security
Compatible with IEEE 802.11n/g/
b
CONSUMPTION OF ELECTRICITY
max. 0.5 WCSA+CE: Nominal:
CSA+CE: Standby: max. 5 mA
LED RGB CONTROL OUTPUT
CSA + CE: Phoenix, 3 pol, MC 1.5 / 3-ST-3.5,
5 VDC - 24 VDC / 5 Amps
LED RGB EXTERNAL POWER INPUT
CSA + CE: Phoenix, 2 pol, MC 1.5 / 2-ST-3,
5 VDC - 24 VDC / 5Amps
MODES OF OPERATION
The Wi-Fi Box allows communication with a home network (Wi-Fi
Router) over a wireless signal.
1. Wi-Fi Box must be wired according to the ProControl App
Setup diagram
2. Wi-Fi-Box must be connected to the Receiver;
connect Receiver to mains power. The Wi-Fi Box starts with
the Access Point Mode (green light flashes) if no home
network is configured. Go to “myfire App Setup”
MINIMUM REQUIREMENT WI-FI ROUTER:
Compatible with IEEE 802.11n/g/b
WPA2 encryption
Radio frequency: 2.4 GHz band
Wireless auto channel: Automated search for WLAN radio
channel free of interference
Support for the User Datagram Protocol (UDP)
Connection to mDNS is required to guarantee Easy Comission
Process
One temperature sensor
MINIMUM REQUIREMENT SMART DEVICE:
IOS 8.0 or Android 4.2
LED 2 RGB LED 1 RGB LED 2
Reset button
(Use paper clip to push button)
LED 1
Power Input Receiver cable
Figure 4: Wi-Fi Box version 2 connections
LED INDICATION ON WI-FI BOX
2 RGB LEDs with 3 colors red / green / blue
Label Status Status
(LED 1)
Receiver
Green Connected to Receiver.
Red Not connected to Receiver.
Off Standby mode is active. No Power supply.
(LED2)
WLAN
Green Wi-Fi connection is safe.
Blue blinking Access point mode is active.
Red Not connected to home network (Wi-Fi Router).
Off Standby mode is active. No power supply.
RESET STATUS ON MYFIRE WI-FI BOX:
Press Reset
Button
LED message Function
Power-On-
Reset or
1-sec-Reset
If no network is set, the AP Mode will be
activated for 2 hours. When the network isn't
set after 2 hours, the Wi-Fi Box will change
into Standby Mode 1.
Once a network is set, the Wi-Fi Box will
connect directly.
10 secs Removes the Wi-Fi settings and turns on the
P Mode for 2 hours.
20 secs Erases all Setup Data. The Wi-Fi chip will be
et to the last version after the reboot. The AP-
Mode will be activated for 2 hours.
NOTICE
A handset or The Puck must be used to achieve full
functionality.
If mains power is lost, disconnect the Wi-Fi Box from the
Receiver. This will prevent Receiver batteries from being
drained quickly.
Multiple users on the same Wi-Fi channel may interfere with
the data transfer. Press reset button on the Wi-Fi Box for 1
second to change current channel (see figure 24).
If Wi-Fi Box is not connected to the Receiver or is not used,
it will leave the Access Point Mode (AP Mode) after 2 hours.
If you have multiple fireplaces using Wi-Fi Boxes, the
minimum distance between the Wi-Fi Boxes must be 60 cm
(2'). A shorter distance may interfere with the data transfer.
Do not connect the combination control system to the
LED connections of the Wi-Fi Box.
WI-FI BOX
Flashing
green and blue
Receiver LED
flashes every
500ms in blue
Receiver LED
flashes every
50ms in blue
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Element4 Lucius 140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Element4 Lucius 140 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Element4 Lucius 140

Element4 Lucius 140 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info