799157
11
Zoom out
Zoom in
Previous page
1/16
Next page
3. Intended use
The hand mower is designed for cutting grass.
It is intended for private use, i.e. for use in home
and gardening environments. Private use here
refers to the maintenance of small-scale, residential
areas and does not include public facilities, sporting
halls, or agricultural/forestry applications.
Important. Due to the high risk of
bodily injury to the user, the hand
mower may not be used to cut
scaling vegetation, planted roofs, or
balconygrown grass.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be
a case of misuse. The user / operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Assembly
4.1 Mower assembly
Screw the push bar top section to the two
push bar extensions . Use the two screws and two
hexagonal nuts for this purpose.
Screw push bar bottom section A, push
bar bottom section B and the two push bar
extensions together.
First attach one push bar bottom section to the
mower, then press the push bar together slightly
and attach the other side.
4.2 Grass box assembly
A. Push the bar frame into the grass box tube.
B. Snap the side fastening lugs on the grass box
over the bar frame.
C. Snap the bottom fastening lug on the grass box
over the bar frame.
5. Adjusting the cutting height
cutting heights can be set between a range of 12 –
45 mm. To do so, pull the spring-loaded bolts (A) on
both sides of out and then engage them in the
required holes.
6. Adjusting the counter blade
Note: The counter blade (B) is only be adjusted
before using the machine for the first time or if the
blades on the mower spindle are worn.
Undo the adjusting nuts (C) (10 mm) on both sides
and adjust the counter blade to the required
position.
The counter blade (B) is correctly adjusted if a piece
of paper placed between the blades on the mowing
spindle and the counter blade is cut if you turn one
of the wheels forwards by hand.
7. Attaching the grass box
Attach the assembled grass box to the roller.
The grass box must also be secured to the push bar
using the belt supplied.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elem Garden Technic TDAM30BAG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elem Garden Technic TDAM30BAG in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info