633192

Elektra Nu-Vista CD - Musical Fidelity Manual

12
Zoom out
Zoom in
Previous page
1/17
Next page
Page 12
Use as DAC
To take advantage of our high quality digital to analogue conversion techniques, this unit has been designed to
enhance listening experience from other S/PDIF digital audio sources such as TV or TV receiver boxes, digital
tuners, media servers, or any other device with S/PDIF digital audio output.
Separately selectable inputs are available which allow up to two coaxial and two optical digital sources to be used.
Simply connect desired digital equipment to the inputs on this unit, using suitable cable.
Any input can be used for most devices, however bearing in mind the limits of the optical receivers it may be
suggested that the OPTICAL inputs are used for lower bitrates such as tuner or TV stereo audio and the COAX
inputs are reserved for higher bitrate units greater than 96 kHz, if used.
COAXIAL 1 input
To use the COAXIAL input 1, press the COAXIAL 1 button on the front panel. Alternatively, use the COAXIAL 1
button on the remote control. The display will flash “no lock” in absence of digital input signal. If a signal is present,
the display will show a steady “locked” message.
Pressing the corresponding button on the remote handset has the same effect (see page 9).
COAXIAL 2 input
To use the COAXIAL input 2, press the COAXIAL 2 button on the front panel. Alternatively, use the COAXIAL 2
button on the remote control. The display will flash “no lock” in absence of digital input signal. If a signal is present,
the display will show a steady “locked” message.
Pressing the corresponding button on the remote handset has the same effect (see page 9).
OPTICAL 1 input
To use the OPTICAL input 1, press the OPTICAL 1 button on the front panel. Alternatively, use the OPTICAL 1
button on the remote control. The display will flash “no lock” in absence of digital input signal. If a signal is present,
the display will show a steady “locked” message.
Pressing the corresponding button on the remote handset has the same effect (see page 9).
OPTICAL 2 input
To use the OPTICAL input 2, press the OPTICAL 2 button on the front panel. Alternatively, use the OPTICAL 2
button on the remote control. The display will flash “no lock” in absence of digital input signal. If a signal is present,
the display will show a steady “locked” message.
Pressing the corresponding button on the remote handset has the same effect (see page 9).
Notes:
Pressing play while on any digital input will automatically switch back to internal CD player. Eject can be
operated without switching back to CD.
Lock indication:
Some devices may halt/disable their digital output signal when nothing is playing. This may result in NO
LOCK being displayed even with proper connection present. This is a quite normal response. Playing
something on the source device should bring up the “Locked” indicator and playback should resume
normally. This behaviour is dependent on implementation of external devices and therefore beyond our
control.
Multichannel:
TVs, DVD/Blu-ray players and related set top boxes sometimes output digital multichannel audio
information. Such information is not recognised by this unit. To ensure correct operation of this unit,
check that the digital outputs on such equipment is set to give ‘PCM 44.1 kHz 16 bit stereo’ or similar.
Consult equipment manufacturer’s instructions/support for further information on how to do this. PCM is
the standard, which the unit supports. Other sample rate stereo PCM equipment is supported too, with
88.2, 96, 176.4 and 192 kHz sample rates on its COAX and up to 96 kHz on its optical inputs, all inputs up
to and including 24 bits.
Stop 11 42:03
Op
tical 2 Locked
Stop 11 42:03
C
oaxial 1 Locked
Stop 11 42:03
C
oaxial 2
L
ocked
Stop 11 42:03
Op
tical 1 Locked
DIGITAL INPUTS
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektra Nu-Vista CD - Musical Fidelity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektra Nu-Vista CD - Musical Fidelity in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info