633191
9
Zoom out
Zoom in
Previous page
1/14
Next page
Page 9
Starting
Once all connections are made, switch on the unit, using the POWER button front of the unit. The display will light
up and base LEDs (under front panel) will show RED. This means the speaker outputs are muted, and will remain
in this state for about 12 seconds, so no sound will be heard from the speakers. Once the delay is up, the base
LEDs go green, indicating unit is ready for use, and any source material selected and playing will be heard through
the speakers.
For the first 15 mins or so, the Nu-Vista valves are still warming up, and the valve illumination will be yellow in
colour. After approx.. 20 mins the valves will have reached full thermal equilibrium and are at their best
performance, which is indicated by the illumination turning green.
Volume
The volume should be adjusted for normal listening levels. This is done by turning the volume up/down knob on
the front panel.
Adjusting the volume can also be achieved by pressing the volume up/down buttons on the remote control handset
(see page 8).
Mute (Remote Control only)
The sound from the speakers may be muted by use of the MUTE button on the remote (see page 8).
Press once, and LEDs under the unit and illumination around the valves will light RED indicating muted state. No
sound will be heard from the speakers.
To return to listening; simply press the MUTE button again so LEDs are no longer red.
CD
To use the CD input, connect CD player outputs to the CD input RCA sockets (see page 7).
Select CD input by rotating the source select control so CD is displayed.
Pressing the corresponding button on the remote handset has the same effect (see page 8).
AUXILIARY 1/HT
To use the AUX1/HT input as a standard input, move the AUX/HT switch on the back panel to the AUX position.
Connect source outputs to the AUX1 input RCA sockets (see page 7).
Select AUX1/HT input by rotating the source select control so AUXILIARY 1 is displayed.
Pressing the corresponding button on the remote handset has the same effect (see page 8).
To use the AUX1/HT input as a Home Theatre input, move the AUX/HT switch to the HT position. This input is
now unaffected by the volume control, allowing volume control on an external Home Theatre processor to be used
directly. Connect home theatre or other source outputs to the AUX1/HT input RCA sockets (see page 7). Select
AUX 1/HT input by rotating the source select control so HOME THEATRE is displayed.
IMPORTANT: Take great care when using the input in HT mode. Ensure that the volume control is turned right
down on the HT processor when first setting up. The HT mode is designed for sources which require their own
volume control to be used. Connecting sources in HT mode with no volume control could result in damage to
hearing and/or speakers due to uncontrolled loud sounds.
AUX 2
To use the AUX 2 input, connect source outputs to the AUX 2 input RCA sockets (see page 7).
Select AUX 2 input by rotating the source select control so AUXILLIARY 2 is displayed.
Pressing the corresponding button on the remote handset has the same effect (see page 8).
TUNER
To use the tuner input, connect tuner outputs to the TUNER input RCA sockets (see page 7).
Select TUNER input by rotating the source select control so TUNER is displayed.
Pressing the corresponding button on the remote handset has the same effect (see page 8).
OPERATION
4
2.0
C
D
6
0.0
C
D
6
0.0
.
A
UXILIARY 1
6
0.0
.
H
OME THEATRE
6
0.0
.
A
UXILIARY 2
6
0.0
.
T
UNER
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektra Nu-Vista 800 - Musical Fidelity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektra Nu-Vista 800 - Musical Fidelity in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info