753497
13
Zoom out
Zoom in
Previous page
1/60
Next page
13
ENGLISH
For machine performance see "Techni-
cal Specifications".
Any other use is not as specified and
prohibited.
The manufacturer is not liable for any
damage caused by unspecified use.
3.1 Powerbox
(welding power source)
3.2 SDV (separate wire feed
unit)
3.3 SWK (separate water-
cooling unit)
The SWK is automatically controlled by
the Powerbox.
Note:
Instructions on how to connect
and operate the SWK are given in the
separate instructions supplied with the
device.
3.4 Control unit
3. Operating Elements
1Connection (front) for earth
cable (- Pole).
2Main switch
switches the Powerbox and all
devices connected to it ON or OFF.
3Power supply outlet for addi-
tional devices
Rating: 10 A / 230 V.
4Bracket with chain
secures the gas cylinder against
turning over.
5Pilot lead
for SDV.
1
2
3
4
5
98
6
7
6Power cable
SDV motor. When using a SWK the
power supply cable is connected to
the SWK. The SDV then automati-
cally controls the water cooling
when welding.
7Welding cable
with cable connector (+ pole).
8Connection (rear) for earth cable
(- pole).
9Power supply cable
with CEE plug.
10 Euro connector socket for weld-
ing gun
for connection of all commercially
available welding guns.
11 Connection for coolant runback
from welding gun.
12 Connection for coolant feed to
welding gun.
13 Connector socket for pilot lead
of external devices.
14 Control unit.
Selection, display and setting of the
operating parameters.
The control unit for the machine’s
default settings is located inside the
SDV.
A
V
10
11
12
13
14
15
16
17
18
20
19
21
15 Connection for shielding gas
line
16 Connector socket for exteral
programming
17 Connector socket for power sup-
ply
18 Connector plug for welding cur-
rent supply
19 Connection for coolant runback
into SWK.
20 Connection for coolant feed from
SWK.
21 Connector socket for pilot lead
22 Parameter selection (momen-
tary contact switch)
for selection of the parameter to be
displayed and/or adjusted.
The LEDs [23-26] indicate the
selected parameter.
23 LED wire feed [m/min]
24 LED welding current [A]
A
V
27
26
25
24
23
28
22
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektra Beckum Mig Mag 232EP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektra Beckum Mig Mag 232EP in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info