629289
42
Zoom out
Zoom in
Previous page
1/64
Next page
-42-
6. Home Automation and PGM
Home Automation is an optional feature that requires an add-on expansion module.
Home Automation enables you to control up to 16 individual lights and appliances
around the home, in this section; we shall refer to these lights and appliances as HA
units and PGM output. The PGM is a programmable output that is triggered according
to specific system status conditions, or by remote command sent via PSTN, GSM,
Ethernet, keyfob, keypad, or Remote Programmer.
HA units and the PGM programmable output can be controlled (using the keypad and
keyfobs, remotely by telephone or SMS) or programmed to react to specific system status
conditions. For example, an HA unit can be programmed to switch on when the system
is armed or when a specific zone is triggered. Additionally, the Randomize feature is
designed to switch lights on and off at night when the system is armed. This gives
potential intruders the impression that the house is occupied.
Scheduling options enable you to program On and Off times for each HA unit. This
feature is found in the main menu. For further information on how to navigate the
menu, refer to Advanced System Operation.
6.1. Keypad Control
Two keys on the keypad enable you to send On and Off commands to HA units, activate
and deactivate the PGM output. How HA/PGM units react to the On command is
determined by the installer in programming.
The HA/PGM unit can be programmed to switch on until the Off command is received
or automatically switch itself off after a pre-programmed amount of time.
To turn HA/PGM units on using the keypad:
1. Press the On key
.
2. Enter the two-digit HA/PGM unit number (01-16, or 30, 31 for PGM);
the chosen HA/PGM unit switches on.
To turn HA/PGM units on using the keypad:
1. Press the Off key
.
2. Enter the two-digit HA/PGM unit number (01-16, or 30, 31 for PGM);
the chosen HA/PGM unit switches off.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electronics Line iConnect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electronics Line iConnect in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Electronics Line iConnect

Electronics Line iConnect User Manual - German - 4 pages

Electronics Line iConnect User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info