English
REPLACING THE DUST BAG, S-bag®
1 The dust bag, s-bag® must be replaced latest when
theindicatorwindowiscompletelyred.Readwiththe
nozzleliftedup.
2 Folddownthecarryinghandle.Pressthecatcheson
thehose,removethehoseandopenthecover.
3 Liftouttheinsertholdingthes-bag®.
4 Pull the cardboard to remove the s-bag® from the
insert.Thisautomaticallysealsthes-bag®andprevents
dustleakingout.
5 a Insert a new s-bag® by pushing the cardboard right
intotheendofthegrooveintheinsert.
5 b Attach the insert by placing it on the back pegs in the
bagcompartment.Thenfolddowntheinsertandclose
thecover.
Note. Replace the s-bag® even if it is not full (it could be
obstructed). Also replace after vacuuming carpet-cleaning
powder. Be sure to use only an original Electrolux dust bags,
s-bag® Classic or s-bag® Clinic.
Replacement of the motor filter (Ref.
No. EF54)
should be done with every 5th replacement of the dust bag,
s-bag®
6 Folddownthecarryinghandle.Pressthecatches,
removethehoseandopenthefrontcover.
7 Liftouttheinsertholdingthes-bag®.
8 Pull the motor filter holder upwards until it comes away
fromthegroove.
9 Carefully pull the old, dirty filter out of the filter holder
andreplaceitwithanewmotorfilter.
10 Reattach the filter holder containing the new motor
filter.
11 Replace the insert holding the s-bag® and then close
thecover.
Replacement of the exhaust filter
should be done with every 5th replacement of the dust bag,
s-bag®
Therearethreetypesofexhaustfilter:
• Microfilter*(Ref.No.EF17)
• HepaH12*nonwashable(Ref.No.EFH12)
• HepaH12*washable(Ref.No.EFH12W)
The filters must always be replaced with new ones and
cannot be washed (except the Hepa H12* washable)
12 Foldupthecarryinghandleuntilitclicksintoplace.
13 Place your thumbs on the back edge of the lid and
then open the lid by pulling the handle backwards and
upwardswithyourindex/middlefinger.
14 Liftoutthefilter.Insertanewfilterandreplacethelid
asshown.
*Certain models only