318765

Electrolux zo 6310 oxy 3 system Manual

14
Zoom out
Zoom in
Previous page
1/54
Next page
13
12
3
4a
5
6
4b
English
* Certain models only.
Cleaning the hose and nozzle
The vacuum cleaner automatically stops if there is a
blockage in the nozzle, tubes or hose or if the fi lter
or dustbag become blocked. Disconnect from the
mains and allow the vacuum cleaner to cool down for
20-30 minutes. Remove the blockage, and/or replace
the dirty fi lter or full s-bag® dustbag. Then restart the
vacuum cleaner.
Tubes and hoses
1 Use a suitable implement to clear the tubes and
hose of blockages.
2 You can also sometimes clean the hose by
“massaging” it. You should, however, be careful
if there is a risk that, for example, glass or nails
have become imbedded in the hose.
NB: Note: The warranty does not cover any
damage to the hose caused by cleaning it.
Cleaning the fl oor nozzle
3 To avoid deterioration of suction power, frequently
clean the carpet/hard fl oor nozzle. The easiest
way to clean it is by using the hose.
4a Remove the wheels and axles by pulling them
right out. Remove dust-balls, hair or anything else
that may have got stuck. Use the crevice nozzle
to clean the wheel axles. Reassemble the wheels
by pressing them tightly together.
4b The auxiliary wheels should be carefully pulled
right out. Clean as required and reassemble in
reverse order.
Cleaning the power nozzle*
Always disconnect the vacuum cleaner from the mains
fi rst.
5 In order to remove the brushroll cover, push the
outer cover out, and the middle cover to the right,
and this will also free the wheels for cleaning.
6 Lift the brushroll and clean it. Remove any hairs
that may have got stuck by snipping them away
with scissors. Reassemble in reverse order.
4b The auxiliary wheel should be carefully pulled
straight out. Clean as required and reassemble in
reverse order.
* Nur bestimmte Modelle.
Reinigung des Schlauches und der Düsen
Staubsauger stoppt automatisch bei Blockierung
von Düse, Rohr, Schlauch, Filter oder Staubbeutel.
Netzstecker ziehen und Staubsauger 20 bis 30
Minuten abkühlen lassen. Blockierung beseitigen
und/oder verschmutzten Filter bzw. vollen Staubbeutel
s-bag® wechseln. Dann Staubsauger normal
weiterverwenden.
Rohre und Schläuche
1 Blockierungen in Rohr oder Schlauch mit einem
geeigneten Objekt beseitigen.
2 Blockierungen des Schlauchs können mitunter
auch durch “Massieren” des Schlauchs gelöst
werden. Dies muss jedoch mit Vorsicht erfolgen,
da beispielsweise Glas oder Nägel im Schlauch
stecken könnten.
Wichtig: Hinweis: Die Garantie deckt keinerlei
durch Reinigung/Beseitigung von Blockierungen
verursachte Schäden am Schlauch ab.
Reinigung der Bodendüse
3 Um ein Nachlassen der Saugleistung zu
vermeiden, regelmäßig Düse für Teppiche und
harte Böden reinigen. Der einfachste Weg, diese
zu reinigen, ist die Benutzung des Schlauchgriffs.
4a Räder und Achsen gerade aus der Bürste ziehen.
Staubmäuse, Haare und andere verhedderte
Objekte entfernen. Radachsen unter Einsatz
der Fugendüse reinigen. Räder durch festes
Zusammendrücken wieder zusammensetzen.
4b Zusatzräder vorsichtig und gerade aus der Bürste
ziehen. Reinigen und in umgekehrter Reihenfolge
wieder zusammensetzen.
Reinigung der Elektrosaugbürste*
Netzkabel des Staubsaugers zuvor unbedingt aus der
Steckdose ziehen.
5 Zum Entfernen der Bürstenrollenabdeckung
die äußere Abdeckung heraus und die mittlere
Abdeckung nach rechts schieben. Auf diese
Weise werden auch die Räder für die Reinigung
freigelegt.
6 Bürstenrolle herausheben und reinigen.
Verhedderte Haare entfernen (ggf. mit der Schere
zerschneiden). In umgekehrter Reihenfolge wieder
zusammensetzen.
4b Zusatzräder vorsichtig und gerade aus der Bürste
ziehen. Reinigen und in umgekehrter Reihenfolge
wieder zusammensetzen.
Deutsch
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux zo 6310 oxy 3 system at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux zo 6310 oxy 3 system in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info