318765
6
Zoom out
Zoom in
Previous page
1/54
Next page
5
1
2
3
4a
5
67
4b
* Certain models only.
Before starting
1 Check that the s-bag® is in place.
2 Insert the hose until the catches click to engage
(press the catches to release the hose).
3 Attach the telescopic tube to the hose handle
and the fl oor nozzle (when you want to remove it
again, press the lock button and pull the pieces
apart). If you have a vacuum cleaner with remote
control*, make sure that the switch is pressed in
properly.
4a Pull out the power cable and plug into the mains.
4b Press the carrying handle to rewind the cable
(hold the plug to prevent it striking you).
5 Some vacuum cleaners, depending on the model,
are equipped with an automatic cable winder
(autoreverse). Pull out the cable and plug in the
vacuum. Move the control backwards in order
to wind the cable in and out as required. Move
it forwards to lock the cable once it is at the
required length.
6 Start the vacuum cleaner using the rolling
control. Increase/reduce the suction power by
adjusting the rolling control. In the auto-position*
the suction power is automatically adjusted
depending on the surface.
7 If you have a vacuum cleaner with remote control*
the machine is started by gently pressing the auto
or min button. In the auto-position the suction
power is automatically adjusted depending on the
surface. Increase the suction power to maximum
power by pressing in the auto button for three
seconds or more. Reduce by pressing the min
button. Turn off the vacuum cleaner by pressing
the off button.
Check lights at start
When the machine is started, all the check lights
initially light up. They will then all go out with the
exception of Optimum. If your Oxy3system is
equipped with remote control*, the min – auto – max
lights fl ash as soon as you plug it in. You then select
the suction power by pressing one of the buttons on
the hose handle.
English
* Nur bestimmte Modelle.
Vorbereitungen
1 Prüfen, ob der s-bag® richtig eingelegt ist.
2 Schlauch einführen, bis Verriegelung einrastet. Zur
Freigabe des Schlauches Verriegelung drücken.
3 Teleskoprohr an Schlauchgriff und Bodendüse
anbringen (zum Lösen Verriegelungstaste drücken
und Teile auseinander ziehen). Bei Verwendung
eines Staubsaugers mit Saugsteuerung*
sicherstellen, dass der Schalter ordnungsgemäß
eingedrückt ist.
4a Stromkabel herausziehen und in Steckdose
stecken.
4b Zum Zurückspulen des Kabels Tragegriff drücken
(Netzstecker festhalten, damit er unkontrolliert
herumschlägt).
5 Manche Staubsauger (modellabhängig) sind
mit einem automatischen Kabelspuler mit
automatischer Umkehr ausgestattet. Stromkabel
herausziehen und in Steckdose stecken. Regler
nach hinten schieben, um Kabel nach Bedarf auf-
und abzuspulen. Regler nach vorne schieben,
um das Kabel nach Abspulen der gewünschten
Länge zu fi xieren.
6 Staubsauger mithilfe des Walzenreglers
einschalten. Saugleistung durch Einstellen
des Walzenregler steigern/reduzieren. In der
Automatik-Stellung* erfolgt eine automatische
Anpassung der Saugleistung an den Untergrund.
7 Bei Verwendung eines Staubsaugers mit
Saugsteuerung* wird der Motor bei leichter
Betätigung einer der Tasten “auto” oder “min”
gestartet. In der Automatik-Stellung erfolgt eine
automatische Anpassung der Saugleistung an
den Untergrund. Zum Steigern der Saugleistung
auf maximale Leistung die Taste “auto”
mindestens drei Sekunden lang betägigen. Zum
Reduzieren der Saugleistung die Taste “min”
betätigen. Zum Ausschalten des Staubsaugers
die Taste “off” betätigen.
Kontrollleuchten beim Start
Beim Einschalten des Staubsaugers leuchten alle
Kontrollleuchten kurz auf. Anschließend erlöschen alle
Kontrollleuchten mit Ausnahme der Kontrollleuchte
“Optimum”. Ist Ihr Oxy3system-Staubsauger
mit Saugsteuerung* ausgestattet, blinken die
Kontrollleuchten “min”, “auto” und “max”, sobald
Sie den Netzstecker einstecken. Die Einstellung der
Saugleistung erfolgt dann durch Betätigung einer der
Tasten am Schlauchgriff.
Deutsch
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux zo 6310 oxy 3 system at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux zo 6310 oxy 3 system in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info