451689
8
Zoom out
Zoom in
Previous page
1/60
Next page
8
9
12
14
13b
15
15a
15b
16b
16
16a
12a
13c
13a
Uppackning och montering
Kontrollera att samtliga delar finns i kartongen.
Laddning
12. Placera Rapido i laddstationen. Dammsugaren ska
alltid vara avstängd när den sätts in i laddnings-
stationen. En indikatorlampa (12a) lyser när Rapido
får kontakt med laddstationen.
Det tar 16—20 timmar att ladda upp batterierna helt
före första användningen. När Rapido är helt urladdad
behövs ca 16 timmars laddning för att få full kapacitet.
Du bör sätta dammsugaren på laddning när den inte
används, så att den alltid är klar för användning.
Adaptern kan bli varm under laddningen. Det är
normalt.
13. Under laddstationen finns ett utrymme där överflödig
sladdlängd kan lindas in (13a). Väggenheten kan
monteras på en vägg eller liknande (13b). Du tar loss
väggenheten genom att skruva ur skruven på under-
sidan av bordsenheten (13c). Se till att väggen klarar
dammsugarens vikt.
Dammsugning
14. Ta ur dammsugaren ur laddstationen genom att lyfta
den rakt uppåt.
15. Starta/stoppa Rapido genom att trycka på start-
knappen (15a) en gång. Om du vill öka sugeffekten
håller du boosterknappen/maxeffektknappen (15b)*
nertryckt.
16. Fogmunstycket och den lilla borsten finns i laddsta-
tionen (16a)* eller på undersidan av dammsugaren
(16b)*. Med fogmunstycket kan du lättare göra rent
svåråtkomliga ställen. Borsten använder du för att ta
bort damm.
Svenska
* Endast vissa modeller.
Unpacking and assembly
Check that all parts are in the box.
Charging
12. Put Rapido in the charging station. Always make
sure that Rapido is switched off when placed in the
charging station. An indicator light (12a) will come
on once Rapido makes contact with the charging
station.
It takes 16-20 hours to fully charge the batteries
before the first use. When Rapido is totally
discharged, approximately 16 hours charging is
required to regain full capacity.
In order to ensure that it is always ready for use,
Rapido should be left on charge when not being
used. The adaptor may become warm during
charging – this is normal.
13. Underneath the charging station there is a hollow
space where redundant cable can be wound (13a).
The wall unit can be mounted on a wall etc (13b).
Detach the wall unit by unscrewing the screw
underneath the floor unit (13c). Always ensure that
the wall can bear the weight of the Rapido.
Vacuuming
14. Remove your vacuum cleaner from the charging
station by lifting it straight upwards.
15. Start/stop Rapido by pushing the start button (15a)
once. For increased suction power, press and hold
the booster (max) button (15 b)*.
16. The crevice nozzle and small brush are positioned in
the charging station (16a)* or underneath the vacuum
cleaner (16b)*. Attach the crevice nozzle to the
vacuum cleaner to facilitate cleaning of areas difficult
to reach or attach the brush for dusting.
English
* Certain models only.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux ZB 403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux ZB 403 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info