Manual Electrolux zb 274 (page 7 of 22) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

315478

Zoom out

Zoom in

1/22

Unpacking and assembly

Check that all the parts are in the box.

1. Attach the handle by carefully inserting it into the brush compartment.

Take care to ensure that the cable does not get jammed.

2. Secure the handle by tightening the locking screw supplied.

3. Snap the charging handle into the charging station and mount it on a

wall or similar. Mount/position the charging station close to a mains

socket (not near a heat source or wet spaces) and insert the adaptor into

the mains socket.

4. Alternatively the charging handle can be directly connected to the

handle.

Charging

5. Connect Ergorapido to the charging station (NB – always ensure

the Ergorapido is turned off). The indicator light will come on once

Ergorapido makes contact with the charging station. It takes 8-10 hours

to fully charge the batteries before the ﬁ rst use. When Ergorapido is

totally discharged, approximately 12-16 hours charging is required to

regain full capacity. In order to ensure that it is always ready for use,

Ergorapido should be left on charge when not being used.

The adaptor may become warm during charging – this is normal.

Cleaning ﬂ oors

You should regularly check that the nozzle cushions and the brush roller are

clean in order to avoid scratching sensitive ﬂ oors

6. Start Ergorapido by pressing the on/off button once.

Stop by pressing the on/off button once again

Emptying/cleaning

7. Turn off Ergorapido, open the top cover and carefully lift out the dust

container.

8. Open the lid of the dust container and empty the contents into

a suitable vessel or bag.

Never wash the dust container in a dishwasher.

Cleaning the roller brush

9. If the roller brush becomes blocked or jammed for any reason, the

indicator light will go out. The roller brush may then need to be cleaned.

First turn off the Ergorapido, then carefully use a pair of scissors or a

sharp knife to remove any items such as threads that may have become

entangled.

10. If the roller brush needs to be lifted out – open the hatch cover using a

screwdriver or something similar and lift it out.

11. Lift out the roller brush and clean it.

Replace the roller brush and make sure it can spin freely.

Reassemble the hatch cover.

Cleaning of wheel axles

If a wheel is jammed by threads or dirt:

12. Remove the wheel by carefully prizing free the wheel brackets using

a screwdriver inserted into the cavity.

Remove threads or any other objects that may have become jammed

in the wheel axles.

Reassemble the wheel and press the wheel brackets together.

NB:

• Never use Ergorapido in wet places.

• Never use Ergorapido near ﬂ ammable gases, liquids etc.

• Never brush sharp objects such as shards of glass or suchlike.

• Never use Ergorapido on liquids, as these can damage the machine.

• Never brush ash, lit cigarette ends etc.

• Never brush ﬁ ne dust from plaster, concrete, ﬂ our or ash, for example.

• Do not leave Ergorapido in direct sunlight.

• Avoid exposing Ergorapido or the battery to strong heat.

• The battery must not be dismantled, short-circuited, placed against a

metal surface or exposed to strong heat.

• Make sure Ergorapido is always turned off when emptying/cleaning.

Disposal

If an Ergorapido is to be disposed of, the batteries should be removed.

Used batteries should never be disposed of with household waste.

These should always be taken to a recycling station.

Taking out batteries

13. NB – Ergorapido must not be connected to the charging station while

the batteries are being removed. Open the battery cover and lift out the

batteries. Pull the ﬂ at pin connectors from their brackets.

Servicing or repairs

In cases of breakdown or faults, your Ergorapido must be taken to an

authorised Electrolux service centre.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux zb 274 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux zb 274 Manual

Product: