709053
40
Zoom out
Zoom in
Previous page
1/48
Next page
Time Manager
The cycle can be made longer or shorter by
using the “Time Manager”
pushbuttons.
The level of soiling of the laundry is also in-
dicated.
Soil level Icon Type of fabric
Intensive For heavy soiled
items
Normal For normal soiled
items
Daily For daily soiled items
Light For slightly soiled
items
Quick
1)
For very slightly
soiled items
Super quick
1)
For items used or
worn for a short time
Refresh
1)
2)
For refreshing items
only
Super re-
fresh
1)
2)
For refreshing a very
few items only
1) To use on a half load.
2) The symbol flashes and disappears : this wash cycle
is a refresh cycle only.
The availability of these different levels var-
ies depending on the selected programme
type.
Start of the programme
Press the “Start/Pause”
pushbutton to
start the cycle ; the corresponding light will
come on green and the symbol
ap-
pears on the display (door locked).
It is normal for the programme selector to
remain stationary during the cycle. The
symbol for the current cycle and the re-
maining time appear on the display. If a de-
layed start has been selected, the count-
down appears on the display.
Warming up
During the cycle, the
symbol comes on
when the appliance is reaching the right
temperature.
Interrupting a programme
Adding washing during the first 10 mi-
nutes
Press the “Start/Pause”
pushbutton :
the corresponding light will flash green while
the appliance is paused. The locking mech-
anism “snaps” twice to indicate that the lid
is open. The symbol
disappears.
Press the “Start/Pause”
pushbutton
again to continue the programme.
Modifying the programme in progress
Before making any changes to the current
programme, you need to pause the wash-
ing machine by pressing the “Start/Pause”
pushbutton. If the modification is not
possible, “Err” flashes in the display and the
“Start/Pause”
pushbutton flashes red for
a few seconds. If you still decide to change
the programme, you must cancel the cur-
rent programme (see below).
Cancelling the programme
If you want to cancel the programme, turn
the programme selector to the “Stop” posi-
tion
.
End of the programme
The washing machine stops automatically ;
the “Start/Pause”
pushbutton goes out
and “0” flashes on the display. The locking
mechanism “snaps” twice to indicate that
the lid is open. The symbol
disap-
pears. Turn the programme selector to the
“Stop”
position. Remove washing. Un-
plug and close water inlet tap.
Stand by : once the programme has finish-
ed after a few minutes the energy saving
system will be enabled. The brightness of
the display is reduced. By pressing any but-
ton the appliance will come out of the ener-
gy saving status.
PROGRAMMES TABLE
Programme / Type of washing Load Possible options
Cottons (cold - 90°) : White or colour,
e.g. normally soiled work clothes, bed linen,
table linen, body linen, towels.
6,0 kg Rinse hold, Night silence plus, Pre-
wash, Rinse plus, Time manager, De-
lay start
40 electrolux
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux WASL3T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux WASL3T in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 12,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info