709053
37
Zoom out
Zoom in
Previous page
1/48
Next page
Dispenser box
Prewash
Wash
Softener (do not fill above the MAX symbol
M
)
SAFETY INFORMATION
Please read these points carefully before in-
stalling and using your appliance. Keep this
user manual with your appliance.
General safety
Do not modify or attempt to modify this
appliance. This would put yourself in dan-
ger.
Ensure that all coins, safety pins, brooch-
es, screws etc have been removed be-
fore starting a washing programme. If left
in washing, they can seriously damage
the appliance.
Use the recommended quantity of deter-
gent.
Put small items together (socks, belts
etc.) in a small linen bag or pillow case.
Unplug and close inlet hose tap after us-
ing appliance.
Always disconnect the power supply
from the appliance before cleaning or
maintenance.
•Do not machine wash clothes with rib-
bing, unfinished or torn material.
Installation
Unpack or ask for the appliance to be
unpacked immediately upon delivery.
Check the outside of the appliance is not
damaged in any way. Report all transit
damage to your retailer.
Remove all transit bolts and packaging
before installing the appliance.
Connection to the water supply must be
carried out by a qualified plumber.
If your domestic electrical circuit needs
adapting to allow the appliance to be
plugged in, use a qualified electrician.
Ensure that, after installation, the power
cable is not trapped under the appliance.
If the appliance is installed on carpeted
floor, ensure that the carpet does not ob-
struct any ventilation ducts located at the
base of the appliance.
The appliance must be equipped with an
earthed power plug which conforms to
regulations.
Before connecting your appliance to the
power supply, carefully read the instruc-
tions in the chapter entitled “Electrical
connection”.
Replacing the power cable should only
be carried out by an authorised service
engineer.
The manufacturer cannot be held re-
sponsible for any damage resulting from
incorrect installation.
Precautions to be taken against frost
If your appliance is exposed to tempera-
tures below 0°C, the following precautions
must be taken:
Close the tap and disconnect the inlet
hose.
Place the end of this hose and the drain
hose in a basin on the floor.
Select the Drain programme let it run until
the end of the cycle.
Disconnect the appliance from the power
supply by turning the programme selec-
tor to “Stop
.
Unplug the appliance.
Replace the inlet hose and drain hose.
This way, the water remaining in the hoses
will be drained away, avoiding any ice for-
mation which would damage your appli-
ance.
Before turning your appliance on again, en-
sure that it is installed in an area where the
temperature will not fall below freezing.
electrolux 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Electrolux WASL3T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux WASL3T in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 12,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info