Manual Electrolux Oxy 3 Silence (page 72 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

511894

Zoom out

Zoom in

1/80

Electrical supply (UK and Ireland only)

Before you start … check the voltage

Before connecting the air cleaner to an electrical supply ensure that the

voltage marked on the data plate (on the reverse side of the air cleaner) is

correct for your electrical supply. If it is not, do not use the air cleaner but

refer back to your dealer.

Connecting to your electricity supply

Permanently connected to the air cleaner is a mains supply (2-core) cable

fitted with a non-rewirable plug incorporating a 13A fuse. In the event of the

fuse requiring replacement the fuse cover should be removed using a small

screwdriver. The old fuse MUST be replaced by a 13A ASTA approved

BS1362 fuse and the fuse cover must be replaced before the plug is used

again. In the event of loss of the fuse cover, replacements can be obtained

from your Electrolux dealer or Electricity Board and must be of the same

colour as indicated by the coloured insert on the base of the plug.

If difficulty is experienced in obtaining a replacement, contact your nearest

Electrolux Service Centre. (Please see the separate Electrolux Service

Organisation leaflet).

In no circumstances must the plug be used without a correct fuse

cover fitted.

If the plug that is fitted to your appliance is not suitable for your socket

outlet, it must be cut off and the appropriate plug fitted. Remove the fuse

from the cut off plug. The cut off plug should then be disposed of to prevent

the hazard of shocks in case it should be plugged into a 13 amp socket in

another part of your home.

The wires in the mains cable of this appliance are coloured in

accordance with the following code:

Blue: Neutral.

Brown: Live.

As the colours of the wires in the mains cable of this appliance may not

correspond with the coloured markings identifying the terminals in your

plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is

marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which

is marked with the letter L or coloured red.

If using a three-pin plug, do not make any connection to the terminal

marked with the letter E or by the earth symbol or coloured green or

green-and-yellow. This cleaner is double insulated and no earth connection

is necessary.

It is in your interest to ensure that the plug is correctly attached to the

mains cable. In case of doubt, have it done by a qualified electrician, as

Electrolux cannot regard the repair of faults on the plug connection as a

service that can be given free of charge under the terms of the guarantee.

As a general guide to fitting any plug:

• Ensure the lengths of wire inside the plug are prepared correctly.

• Connections should be firmly made after all conductor strands are

entered into the terminal posts.

• When preparing the cable ends take care not to damage the outer

sheath, or the insulation surrounding the inner conductors.

•Tighten all screws.

• Replace the top cover of the plug and secure.

ANY PROBLEMS?

08706 055 055

CUSTOMER HELPLINE

DON’T TAKE

Something missing?

Don’t understand the instructions?

We are only a telephone call away.

Need more help?

IT BACK TO THE SHOP

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux Oxy 3 Silence in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux Oxy 3 Silence Manual

Product: